Simplifying measurement of RSE for LTE devices

Wed, 02/08/2012 - 1:24am
ECN Europe

Rohde & Schwarz is taking a completely new approach to measuring radiated spurious emissions on LTE devices, making it considerably easier to measure RSE in the presence of LTE carrier power. The solution is the R&S OSP open switch and control platform equipped with the new R&S OSP-B155 option, which the company says has a price no higher than that of a conventional test setup with notch filters.   With conventional wireless communications techniques, the high-level radio signal can be filtered out at reasonable effort to enable RSE measurements. On the other hand, LTE defines 43 frequency bands and can transmit – at full power – in six bandwidths in each band. Filtering out all LTE signals present in each band and bandwidth would involve tremendous effort, requiring a separate cabinet solely to accommodate the 258 filters needed to cover all frequency bandwidth combinations. The new R&S OSP-B155 plug-in module shifts the entire received signal spectrum into the optimum power range to allow full use of the dynamic range of the connected EMI test receiver.



Share this Story

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.