RJ45 jack: Unbeatably tiny and small

Fri, 04/08/2011 - 5:20am
ECN Europe

The type 100362XR008XX00ZX eight-position ultra-low profile RJ45 jack from SUYIN for through-hole (THT) mounting has an overall height of just 9.6 mm. Compared to other low-profile products available on the market that also feature drastically reduced overall heights between 11.45 mm and 11.60 mm, that is a true rarity.

Yet there are other important differences as well. In order to also keep the mounting height on the PCB to a minimum, the new low profile RJ45 jack has been prepared for in-board mounting. As a result, due to its offset mounting position, the mounted connector only protrudes above the PCB surface by 4.4 mm. Soldering tabs on the jack’s sides provide a high degree of mechanical rigidity and ensure excellent resistance to removal forces. The overall dimensions of this right-angle, EMC-shielded RJ45 jack are 18.60 x 16.68 x 9.60 (L x W x H, in mm, overall). Key electrical specifications include the guaranteed number of mating cycles, which is specified at 5,000, as well as the voltage and current capacity per contact of 110 VDC / 1.5 A, the contact resistance of 50 m? (initial) and, among others, the insulation resistance of 500 M?.

SUYIN emphasizes that, depending on the order volume and lead time, versatile customer-specific adaptations are possible – for instance, for different numbers of positions or types of contact plating, for special colours or for many other similar characteristics




Share this Story

You may login with either your assigned username or your e-mail address.
The password field is case sensitive.