Considering the military's exemption to RoHS regulation and its continued need for leaded parts, where do you think the reduced availability of leaded parts will make the greatest impact on the Mil/Aero market?
Touchscreen technology has become more prominent in recent years, especially in the consumer and kiosk markets. PDAs, ATM machines, supermarket check-outs, and Apple’s iPhone are among the most well-known uses of touchscreen technology. Some touchscreen technologies have found a place in applications where the more commercially known technologies (resistive and capacitive) are inadequate. This month, we review the different types of touchscreen technologies available for the consumer electronics industry, along with their pros and cons, their applications, and a look into the future.
Everyone is worried about the global economy, and many are afraid that the U.S. electronic design and manufacturing industry is facing dire straights. To those who worry, I say that the primary American electronic markets are amongst the most economically stable places in this crisis, and have some of the most innovative and creative engineers in the world.
Stepper motor system designers today require more than simple drivers. They demand increased value such as reduced BOM costs with higher performance, which is helping stepper motors gain popularity in many applications historically reserved for DC motors.
Internet mobility is growing today and is the way of the future. The challenge we are seeing with the current generation of Wireless Internet devices is revealed in the battle between Internet upload performance and battery life. End (cell phone) users’ expectations are rising to match the high upload speeds like those of the wired Internet -- without the burden of constantly recharging their batteries.
I'll begin this column with a recommendation: Start kits with a set of basic hand tools. When my son went to college, he had tools to hang pictures, connect TV sets and CD players, and tighten desks and shelves. As a result, he met most of the people on his co-ed floor. When our daughter went to college she got a tool kit, too. I suggest Phillips and flat-blade screwdrivers, pliers, diagonal cutters, wire strippers and a couple of adjustable wrenches. Later you could add a set of nut drivers, sockets wrenches and an inexpensive soldering iron.
You can think of direct digital synthesis as a technique that lets a digital value control the frequency of a sine wave. At its simplest, a DDS circuit involves a binary counter, a ROM programmed with equally spaced sine values for one full wave, and a digital-to-analog converter to convert the stored sine values to voltages. The frequency of the counter's clock determines the sine-wave frequency, but that's an inflexible arrangement.
What are your thoughts on the EPA’s Residential Light Fixture “Technical Amendment,” and their attempts to remove a “competitive disadvantage” for legacy technologies?
While researching for this month’s Industry Focus on Automotive Electronics, I encountered an issue pertaining to infotainment I never considered: government regulation. It arose as the I was asking questions about head-up display (HUD) technology. Industry trends are showing that caller ID, lights for speed, gas and warnings, radio station name...
When consumers shop for a new vehicle, they look at price and gas mileage as key factors in their purchasing decision. Technology, now more portable than ever, is also on the mind of the American consumer. Cell phones, GPS navigation devices, mp3 players, and other video applications are becoming both a necessity and a convenience for drivers.
In this paper we present two unique NVM solutions which can close two significant gaps in the embedded memory IC world. Today’s designers have a large choice of embedded non-volatile memories (NVM) verified in different production technologies. These memories can be divided into three groups
Protecting Ethernet interfaces from cable discharges can create a challenge for engineers because good protection must meet two criteria. First, and most important, a protective device must effectively clamp a transient to a safe voltage. Second, the device must present an acceptable capacitive load on high-speed differential transmission lines. Good planning and careful selection of transient voltage-suppression devices can adequately protect Ethernet interfaces from electrostatic discharges (ESDs) and cable discharge events.
When engineers start to evaluate a precision digital multimeter (DMM) they first think about resolution and accuracy. "They may start with requirements for a high and low measurement limit and a tolerance," said Chuck Cimino, a marketing director at Keithley. "Then they figure out how many digits they need without going into a lot of the DMM's detailed specs."
Previously analog-to-digital converters (ADC) at high input frequencies were limited in usefulness due to distortion and noise performance. Today, however, ADCs can provide nearly 9.5 bits of effective number of bits (ENOB) at radio frequencies (RF) of 1 GHz with signal bandwidths greater than 200MHz. Such performance at high frequencies eliminates a mixer stage, simplifying receiver design to improve overall system performance.
When engineers tackle a project that uses ZigBee communications they may get a surprise. Unlike point-to-point communications, ZigBee involves a network that can establish nodes, repeaters and complex mesh topologies. The proper test tools--often called "sniffers"--help engineers diagnose ZigBee-network problems that could otherwise turn into nightmares.