Global challenges in energy generation and consumption motivates governments worldwide to set ambitious goals for increased energy efficiency, which results in a fast growing need for energy efficient buildings. Therefore, innovative, sustainable technologies that can be easily installed, especially in retrofit projects, are a necessity if the governments’ ambitious objectives are to be realized.
3D printing has been used for years in larger companies, like the one I work for now. It is incorporated into the mechanical design process as part of the overall development and is optionally tailored out if not necessary or particularly useful. When end customers, as well as designers, see a plastic mock-up of the widgit they desire...
Saving time and money on testing embedded hardware - putting design and production tests in their placeOctober 24, 2013 2:23 pm | by Dunstan Power, Director of ByteSnap Design | Comments
Recent high-profile product recalls and failures have shown that even the most experienced and well-funded company can fall down when it comes to product testing. A product goes through two fundamental types of test. The first is of the design itself and the second is production testing of the product.
Reconfigurable heterogeneous architectures deliver flexibility and performance for complex applicationsOctober 23, 2013 4:47 pm | by Chris Warner, Executive Editor | Comments
Embedded systems designers, more than ever, are seeking flexibility in how they work with processing elements to help keep risks low, speed time to market and control cost. Traditional embedded systems often rely on general-purpose processors and microcontrollers or multicore processors.
Since its humble beginning more than 80 years ago in Farnsworth’s lab, video has grown to be a ubiquitous part of life. Devices like HDTVs, smartphones, and tablets coupled with services like YouTube, Netflix, and Facebook have put video near the center of most people’s lives.
Here at ECN we're always looking for what's going to change the world of electrical design. This month we're focusing on board-level assembly. From adhesives to thermal gap pad management, we want to know what's happening in your lab and on your benches! We know our readers have varied opinions and valuable experiences...
Our increasingly connected world and the oceans of data we generate has put the datacenter under tremendous pressure to accommodate our demands efficiently and reliably. ECN recently interviewed Ajith Jain, Vicor’s director, global communications and computer unit about the trends and the challenges facing designers of datacenter devices.
While cutting costs, and without increasing physical resources, companies can exponentially increase workload capacities by virtualizing their existing servers. However, despite the many obvious benefits of virtualization, it can also present challenges regarding the actual location of data on servers....
As projected capacitive (PCAP) touch panels continue to gain market share in the industrial and embedded markets, they are also branching out into new markets, including the marine industry. The marine environment presents unique challenges to a PCAP sensor, requiring specialized designs to overcome these challenges and provide optimum performance.
The movement to tap silicon photonics as an underlying technology for higher performance, low-power consumption data centers is well underway. In fact, fast interconnects have become a pacing factor for the industry, particularly as data centers become the backbone for cloud computing, which continues to accelerate with market demand.
Our increasingly connected world and the oceans of data we generate has put the datacenter under tremendous pressure to accommodate our demands efficiently and reliably. ECN recently interviewed Dr. Karim Wassef, general manager of the Embedded Products business unit for GE’s Critical Power business about the trends and the challenges facing designers of datacenter devices.
Video traffic from a myriad of devices, including smart phones, tablets, laptops and other devices, is overloading today’s networks. What’s more, the increased traffic must co-exist with legacy 2G and 3G protocols and anticipated new standards as the industry moves forward to 4G and beyond.
How test instrument manufacturers can design to meet the expectations of new and experienced engineersOctober 14, 2013 2:36 pm | by Jonathan Tucker, Keithley Instruments, Inc. | Comments
A recent industry study indicates one out of five electrical engineers now in the global workforce has started his or her career within the last 10 years. These newer engineers tend to be more software-oriented than some of their more experienced colleagues due to recent changes in universities’ electrical engineering curricula.
JTAG/Boundary Scan has become an increasingly valuable application, in particular in the development departments of small and large companies. On the one hand, this is due to the enormous potential the technology provides and, on the other hand to the problems increasingly compact assemblies and components place on test technologies with respect to mechanical access.
The need for seeing additional current and voltage detail is increasing. Many scope users want better ability to see small signal changes on a large signal (high dynamic range measurements). Power rails, biomedical technology developed to interact with human physiology, high-energy physics experiments that produce small pulses....