Although an increasing interest and use of Permanent Magnet Synchronous Motors (PMSM) can be observed during the last decade, the standard 3-phase Induction Motor (IM) is still the most widely used electrical motor. The simplest way to start an IM is to connect the motor directly to the 3-phase main supply.
An RF designer’s wish list for an ideal high frequency capacitor would include extremely high temperature stability, a sharp self resonance (high Q) free from harmonics, extremely tight capacitance tolerance, low ESR (equivalent S\series R\resistance), low ESL (equivalent series inductance), complete reproducibility
Young people with an interest in electronics still have a cornucopia of kits to start with. As a youngster I had a crystal radio that picked up several local stations I listened to with a small headphone. You can still buy crystal-radio kits and many cost under $20.
I want to take a look at PID loops and how they are typically handled in software. I'm going to contrast how the motor control folks do things vs. how the chemical industry folks do things. Now there are all kinds of things you can control with such a loop (in a motor control context).
The current state of healthcare today in the US is one which focuses upon cost containment, while at the same time, providing the advancements of modern technology to an aging population. Finding effective treatment methods at affordable levels, while at the same time providing patients with high quality care is certainly a tightrope act many healthcare providers walk.
Medical electronic assemblies have unique requirements that set them apart from other types of electronic devices, such as consumer electronic products. Often, thermal management issues must be anticipated in the design, and assemblers must conform to certain quality standards such as ISO 13485.
The medical market, while on the frontier of human sciences, has always been conservative and cautious when it comes to analyzing the market’s technology adoption rate. While the rest of the industrial and consumer markets were immersed in the potential of wireless connectivity, networking and the Internet, the medical market continued to build devices with tried and tested technology.
What future technologies will reduce healthcare costs?
In 10 years, which display technology will dominate the TV marketplace?
The controller area network (CAN) bus has gained popularity in applications such as process control, automation, medical, and manufacturing due to high immunity to EMI and its ability to find and repair data errors. Because a CAN bus often runs over long distance interconnecting multiple systems, isolation between the bus and the systems connected to it becomes crucial.
Storage in Streaming Media: Advanced Solid State Storage SSDs Meet Performance and Reliability DemandsSeptember 29, 2009 12:24 pm | by Gary Drossel, Western Digital | Comments
The rapid adoption of streaming media in embedded applications has been largely driven by decreasing bandwidth costs. In 2005, it cost approximately $.89 per gigabyte (GB) delivered for up to 49,000 GB (47.8 terabytes) of bandwidth. Today, a major content provider could pay a meager $.05 per GB delivered for 500 terabytes of bandwidth.
From hearing aids to Positron Emission Tomography (PET) imaging equipment, medical devices are increasingly impacting (and hopefully improving) our quality of life. Because we now rely on medical devices so heavily and because the devices’ software is so critical to their operation, software fault management and the ability to reduce faults throughout the development lifecycle have become hot-button issues.
Write-intensive applications require a mix of controller, storage media, and solid state storage management algorithms to achieve optimal endurance and lifespan, while read-intensive applications just go for the lowest cost per gigabyte. A key design metric for long product lifespan requires an understanding of the concept of write amplification and its crushing affects resulting in SSD failure when overlooked.
In Crossing the Chasm, Geoffrey A. Moore introduced the Technology Adoption Lifecycle. This curve highlights a chasm that exists between visionaries who are early adopters of technology and pragmatists who wait for proven technologies and products. For technologies to “cross the chasm” one key component are products with defined product specifications and system deployment guidelines.
The input signal is v1; the first five harmonic-distortion products are v2 through v6; and the ADC electronic noise is vn. The reciprocal of THD + Noise, the signal-to-noise-and-distortion ratio, or SINAD, is usually expressed in dB. If SINAD is substituted for the signal-to-quantizing-noise ratio, we can define an effective number of bits that a converter would have if its signal-to-quantizing-noise ratio were the same as its SINAD.