Advertisement
Articles
Subscribe to ECN Magazine Articles
View Sample

FREE Email Newsletter

ECN Daily

Converging trends for cloud and HPC – Taking the next step

July 15, 2014 1:54 pm | by Sanjay Bhal, focused end equipment manager, cloud and HPC, TI | Texas Instruments | Comments

We are living in an exciting time of change. The era of cloud computing has come upon us over the last few years bringing profound changes in the way we conduct our day to day lives. We are seeing a lot of changes in the way traditional high performance computing (HPC) applications are developed and deployed....

TOPICS:

From cloud automation to cloud orchestration: Migrating and managing applications painlessly

July 15, 2014 11:09 am | by Nati Shalom, CTO and Founder, GigaSpaces Technologies | Comments

With use of the cloud comes the ability to use as many resources as needed, essentially endless resources on demand, using a “pay-as-you-go” model.  In a world where everything is dynamic and IT environments are constantly changing, this is becoming an ever-growing necessity....

TOPICS:

Why PLM is moving to the cloud

July 15, 2014 11:02 am | by Steve Chalgren, Vice President of Product Management and Strategy, Arena Solutions | Arena Solutions | Comments

This is a golden age of innovative electronics. Lowered barriers to entry for innovators in the form of lowered costs, funding, and more ubiquitous manufacturing options are making it much easier for anyone with a good idea to become an entrepreneur. So what does all this have to do with cloud-based product lifecycle management (PLM)?

TOPICS:
Advertisement

How has rapid prototyping affected your job or industry?

July 15, 2014 10:51 am | by ECN Staff | Comments

The need for rapid prototyping has always existed, however with the development of new tools and technologies, many of the traditional hurdles of prototyping have been eliminated. For instance, LCD display design, GUI development, MEMS sensing, motor control, RTOS or OS usage, and cap touch sensing are just a few of the obstacles....

TOPICS:

Deployable renewable energy systems power critical equipment on the battlefield

July 14, 2014 4:31 pm | by Chris Warner, Executive Editor | Comments

The United States Department of Defense (DoD) is the largest consumer of energy in the United States. Much of that energy is consumed in harsh environments to power tanks, armored vehicles, fighter jets, generators, small hospitals, command outposts and operations centers out in the field. All of these applications are critical....

TOPICS:

Guide to designing a device incorporating MEMS-based pico projection

July 11, 2014 4:00 pm | by By Carlos Lopez, Strategic Marketing Manager for Pico Products, Texas Instruments DLP | Comments

Over the last few years, millions of products incorporating pico projection have shipped, and developers are innovating new applications for this rapidly growing display category. Ideal applications for pico projection include near eye display, interactive digital signage, head mounted display, ultra short throw (UST) TV, standalone portable projectors and embedded projection in smartphones, tablets and laptops.

TOPICS:

Guide to designing a device incorporating MEMS-based pico projection

June 27, 2014 2:49 pm | by Carlos Lopez, Strategic Marketing Manager for Pico Products at Texas Instruments DLP | Comments

Over the last few years, millions of products incorporating pico projection have shipped, and developers are innovating new applications for this rapidly growing display category. Ideal applications for pico projection include near eye display, interactive digital signage, head mounted display, ultra short throw (UST) TV, standalone portable projectors and embedded projection in smartphones, tablets and laptops.

TOPICS:

USB 3.0 in surveillance and machine vision cameras

June 24, 2014 3:53 pm | by Abhishek Gupta & Saranjit Gupta, Cypress Semiconductor Corp. | Comments

USB 3.0 is becoming one of the most promising interfaces for camera-based commercial applications as well as industrial and medical imaging. All of the leading camera manufacturers in the vision and imaging market, including Basler, Ximea, IDS Imaging, and Lumenera, have introduced USB 3.0-based cameras....

TOPICS:
Advertisement

Optimizing CAN node bit timing to accommodate digital isolator propagation delays

June 17, 2014 12:25 pm | by Dr. Conal Watterson, Sr. Applications Engineer, Analog Devices | Comments

Controller Area Network (CAN), standardized under ISO 11898, is widely used in industrial and automotive applications. CAN protocols such as DeviceNet or CANOpen rely on the built-in error checking and differential signaling. Galvanic isolation can further enhance robustness....

TOPICS:

In-car networking technology

June 13, 2014 10:28 am | by Bert Bergner, Principal Engineer, Advanced Development Infotainment Automotive; TE Connectivity, Bensheim Jens Wuelfing, Development Engineer, Product Development Infotainment Automotive, TE Connectivity, Bensheim Andreas Engel, Senior Manager | Comments

There are a broad variety of data busses available for use in today’s automotive communication infrastructure: from the cost efficient dedicated control message systems, such as LIN, CAN and FlexRay, up to optimized media streaming networks like MOST....

TOPICS:

Slot machines get personal

June 13, 2014 7:09 am | by Chris Warner, Executive Editor | Comments

Playing a slot machine is more than just pulling the arm or pressing a button. Today’s slot machine manufacturers are incorporating more immersive, interactive features such as vivid, 4K displays with high-end graphics and animation, games based on tie-ins with popular entertainment brands from movies to game shows ...

TOPICS:

The role of smart TVs in gaming

June 12, 2014 4:52 pm | by Chad Lucien, SVP, Sales & Marketing, Hillcrest Labs, www.hillcrestlabs.com | Comments

TVs have long been at the center of the video game industry. From first person point-and-shoots to family-friendly tennis matches and high-speed racing games, game consoles connected to TVs have dominated the gaming scene for decades. This has changed now that smartphones and tablets have become gaming platforms....

TOPICS:

Com exCu: Industrial wireless

June 12, 2014 3:46 pm | by Joshua Israelsohn, Director, JAS Technical Media | Comments

Like general-purpose computational resources in commercial enterprises, factory automation systems have evolved from highly centralized structures with fixed peripheral connections to flexible models with distributed intelligence and networked I/O nodes. In the factory environment, networking and distributed intelligence increased resource availability....

TOPICS:
Advertisement

Decisions, decisions, decisions

June 12, 2014 8:28 am | by Rondekka Moore Vice President, Demand Creation, Avnet Electronics Marketing Americas | Comments

The distribution channel provides tools, services, and training to support our customers’ engineering communities. A question I am often asked is: just how does that help? With the exceptions of pure play engineering design services and reference designs, just how does our contingent of account managers ...

TOPICS:

EV design raises the bar for electric system design tools

June 11, 2014 4:28 pm | by Chris Aden, Product Marketing Manager, Silicon Engineering Group, Synopsys | Comments

Designing electrical systems for electric vehicle platforms is much more complicated than designing electrical systems for internal combustion engine (ICE) platforms. To meet the new challenges, system engineers require design tools capable of scaling with EV system complexity....

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading