Operating in the EB Propsim radio channel emulators, EB’s new spatial channel modeling (SCM) and SCM extended (SCME) emulation method and tool target mobile devices and base stations using Mobile WiMAX and 3GPP LTE. The product is based on a geometry-based stochastic modeling method for system-level emulations and performance metrics, such as throughput and delay, are measured over a number of
President Obama has ordered the EPA to “review” its denial of California’s request for exemption to federal emissions standards. On Monday, January 26th, Obama gave a press conference relating to, “Jobs, Energy Independence, and Climate Change.” Among other things, he spoke about America’s dependence on foreign oil, the proposed American Recovery and Reinvestment Plan, and the aforementioned EPA denial.
Using seventeen SERializer/DESerializer (SERDES) channels in the Lattice SC and Lattice SCM (Lattice SC/M) devices, the SERDES Framer Interface, Level 5 (SFI5) Intellectual Property (IP) Core from Lattice Semiconductor enables the creation of next-generation 40-Gbps systems. LatticeSC/M FPGA devices include 4- to 32-channels of high-speed SERDES capable of supporting data rates from 600 Mbps to 3.8 Gbps
Offering 3, 4, 8, or 10 positions, Mill-Max’s Series 917 TO-5 and TO-100 transistor sockets have precision-machined, brass alloy receptacles assembled with a Mill-Max, 4-finger #30 contact inside each socket. The #30 contact exhibits a pin diameter acceptance range from 0.015” to 0.025” and a current rating of 3 A per position. The through-hole and SMT devices utilize high-temperature thermoplastic suitable for wave soldering and
Including a temperature probe, test leads, alligator clips, and a soft case, Fluke’s latest version of the FlukeView Forms analysis and reporting software comes in a combo kit with Fluke 289 or Fluke 287 digital multimeters. The product offers TrendCapture for recording events and display results on the built-in display screen; and data logging for recording up to 15,000 events over time before downloading the results to a PC. The software presents
Including a remote on/off signal, XP Power’s 12-W JTF12 Series and 20-W JTM20 Series DC/DC converters offer 4:1 input ranges from 9 VDC to 36 VDC or 18 VDC to 75 VDC. The devices exhibit dual output voltages of ±5 VDC, ±12 VDC, or ±15 VDC that are fully regulated to within ±0.5% over all input ranges and to
The 1100 R and 1300 R series of radial lead format inductors from Murata Power suit low and medium current applications. The 1100R series has overall dimensions of 4.0 mm diameter x 5.5 mm, is offered with inductance values ranging from 1.0 µH to 470 µH, and has a maximum current rating
Moeller’s SYST-M line of ready-to-use industrial enclosed motor starters are rated to 60 HP at 575 V. The three-part non-reversing and reversing starters are UL/CSA approved and come in both non-combination and fused-combination configurations. All starters are housed
Providing RF transparency for installation in close proximity to radio antennas, the Model 9732-UAV ice detecting transducer probe from New Avionics also solves the problem of conductive metallic interference with mission-critical RF gear on unmanned aerial vehicles and other small aircraft. Weighing less than 10 grams, the sealed sensor consumes less than 2 watts and has an ice sensitivity of 0.001 inch or better.
Being billed as the world’s smallest, Avago Technologies’ and the FAULHABER Group’s PA2-50 rotary encoder measures 3 mm × 3.28 mm × 1.26 mm. The component incorporates the AEDR-8400 optical IC with a transmitter and emitter located on the same SMT surface. The motor connections are integrated into the flex circuit. The 6-mm D unit demonstrates power consumption of 8 mA at 3 VDC, making it suitable for
Suiting 12-V or 15-V industrial power rails, Texas Instruments’ TPS61500 DC/DC boost LED driver (SSLD) offers an input voltage range from 2.9 V to 18 V. The 14-pin, HTSSOP-packaged unit presents a 3-A current switch with integrated FET for powering 4 3-W LEDs at an input voltage of 5 V and 8 3-W LEDs at an input voltage of
Supporting the dsPIC33F family of motor control DSCs, Microchip’s dsPICDEM MCLV development board (part # DM330021) provides a method for evaluating and developing sensored or sensorless BLDC and Permanent Magnet Synchronous Motor (PMSM) control applications. The product contains a three-phase inverter bridge
Providing a combination of appliance inlet and circuit breaker in a single module, the Series 6135 and 6136 families of power entry modules from Schurter are compact enough to be mounted in 1U-sized products and enclosures. The 6135 offers a C14 appliance inlet and the 6136 a C20 inlet, according to IEC 60320. The 6135 offers a 2-pole switch with or without 1- or 2-pole overcurrent protection, while the 1-pole 6136 is offered with
Combining process technology with planar cell structure technology, a series of high-voltage pi-MOS VII MOSFETs from Toshiba is intended for AC/DC and ballast applications. The first seven 500-V devices in the series provide a selection of drain current from 5 A to 15 A (max.) with R(DS)(ON) from 1.50 Ohm to
The Pathway Model 7385 DB-9 Interface A/B/C/D switch from Electro Standards Laboratories is a desktop network switch that allows the sharing of a single DB9 interface device among 4 other devices. Resistance between the common port pins and the corresponding current position pins is <0.8 Ohm. With no local front panel controls, the