With a frequency range up to 5 MHz, the IHLW-5050CE-01 winged inductor from Vishay is intended for voltage regulator module (VRM) and dc-to-dc converter applications in end products. The inductor offers an inductance range from 0.10 µH to 10 µH, a saturation current range from 14.0 A up to 84 A, typical DCR from 0.8 mO to 30.4 mO, and maximum DCR from 0.96 mO to 34.0 mO
Featuring a snap-action switching system, the Series 56 pushbutton from EAO protects itself from damage. A stable force is always applied to the switch unit independent of the one exerted on the lens. The pushbutton includes a 34-mm dia. aluminum lens. The Series 56 features protection to IP67 against water and dirt ingress. With flush-mounting, it creates a tamper-proof unit
Intended for PC-based control and automation of equipment including sensors, switches, and other devices, the DIO-32.PCIe PCI Express digital I/O interface adapter from Sealevel provides 16 optically-isolated inputs and 16 reed-relay (10 VA) outputs. Designed for computers with X1 PCI Express slots, the device is available in versions with inputs from 3 to 13 V or 10 to 30 V.
Offering pin and software compatibility to each other, Maxim Integrated Products’ MAX5134/MAX5135 (quad) and MAX5136/MAX5137 (dual) 16- and 12-bit digital-to-analog converters (DACs) draw <300 nA of power in sleep mode. The 4-mm × 4-mm, 24-pin TQFN-packaged devices operate on an
Operating in industrial, aviation, and utility environments, Absopulse Electronics’ CTP 3K Series inverter systems deliver 3 kVA of 3-phase sine wave output power. The devices provide 208-Vrms, 380-Vrms, or 415-Vrms continuous symmetrical 3-phase output at 50 Hz, 60 Hz, or 400 Hz from inputs of 24 VDC, 36 VDC, 48 VDC, 25 VDC, or
Having 2 inclined operating panels at right angles to each other, OKW Enclosures’ UNITEC front-sloping enclosures can be used for face-to-face applications requiring simultaneous input of data on one side and readout on the other. The 5.826" × 8.267" × 3.149" or 0.984" devices consist of a top part, rear-facing front part, and base panel molded in ABS (UL 94 HB). The cases offer an optional battery compartment for 3 or 5
Running on the complete line of USBee test pods, CWAV’s USBee Suite logic analyzer and oscilloscope software application provides serial bus decoding for I²C, SPI, Async, 1-Wire, CAN, and USB. The product includes in-line graphical bus decoding, automatic measurements of waveform data, graphical bus setup, and importing and exporting capability. The suite captures samples at up to 24 Msps and lets users
Based on StrataFlash memory architecture, the first multi-level cell NOR flash memory products from Numonyx using 45-nm process technology extends beyond its 65-nm predecessor and is presented as the most advanced memory of its kind available. The 1-Gb monolithic device is drop-in compatible with the company’s existing
Coming in a 0.300" × 0.160" × 0.114" SMT package, OPTEK Technology’s OPB733TR reflective object sensor exhibits an optimizing detection range from 0.400" to 1". The component contains a lensed IR LED with a typical peak emission wavelength of 890 nm. The sensor uses a NPN silicon phototransistor offering output on-state
Serving LED indicators and LCD or keyboard backlighting in entry-level mobile products, AnalogicTech’s AHK3292 2-channel LED driver (SSLD) has a typical dropout voltage of 36 mV. Operating off an input supply from 2.7 V to 5.5 V, the component drives up to 2 LEDs. The SSLD exhibits a maximum LED current of 30.2 mA with ±10% LED output current accuracy and ±3% LED output current matching. An
Developed to provide plug-and-play connectivity for applications using PROFINET protocols, a 4-wire cordset family from TURCK connect to BL67 Ethernet gateways for PROFINET—which can be connected to up to 32 I/O modules per gateway—to allow smooth integration into current fieldbus structures.
Using a self-passivating and moisture-resistant tantalum-nitride resistor element, OnChip Devices’ TX, TL, and TR silicon resistor chips perform in medical, aerospace, military, communication, and instrumentation applications. The TX components exhibit a die size of 20 mm × 20 mm, resistance from 10 Ohm to 1 MOhm, absolute tolerance of
Meeting IEC 60950-1:2001 safety standard ITE (rated for 250-VAC working voltage), Aimtec’s AM1DC-Z Series 1-W DC/DC converters demonstrate I/O isolation of 6,000 VDC with an isolation barrier of 2.50 mm. The 19.56-mm × 9.90-mm × 12.45-mm devices offer input voltages of 5 VDC, 12 VDC, and 24 VDC; and output voltages of
Integrating a 1.5-GHz Core 2 Duo CPU with 1-GB DDRII RAM, Advantech’s UNO-3282 embedded computer includes a PCI slot, a PCIe slot, and a user-replaceable kit which can replace the PCIe/PCI slot combination with two standard PCI slots. The device has a fanless, diskless, and cable-less design, and performs in
Designed to avoid ground loops, Dytran Instruments’ Model 3232A2 piezoelectric biaxial accelerometer targets Health and Usage Monitoring Systems (HUMS) and Active Vibration Control (AVC) applications typically found on commercial and military aircraft. The accelerometer elements are mounted orthogonally within