Serving the Electronic Design Community Since 1956
Low Profile MIL-STD-1553 Dual Transformer with Side-by-side Configuration
March 18, 2008 5:51 am | Product Releases | CommentsBeta Transformer Technology Corporation introduced the DSS-2000 dual transformer with and ultra low profile 0.130” maximum height. The device has a side-by-side configuration and is available in ratios compatible with 3.3V, 5.0V, 12V, and 15V transceivers. The 0.130” height makes suitable for today’s smaller MIL-STD-1553 board topologies and has ratios to meet both long and short stub applications
SMT LEDs Present Sub-Millimeter Profile
March 17, 2008 11:28 am | Product Releases | CommentsProvided in a CLCC-6 FlatPackage configuration, the VLMW621 family of warm-white SMT LEDs is presented as having the lowest profile (0.9mm high) of its type. The ceramic-encased InGan devices are available with luminous intensities from 1800mcd to 7100mcd and thermal resistances of 40K/W junction to pin and 90K/W junction to ambient. The devices have a 140 mA forward current, a 4.3V maximum forward voltage, and 650 mW of power dissipation
Collaborative Equalization Methodology Combines Software and Hardware
March 17, 2008 9:11 am | Product Releases | CommentsUseful for applications from professional sound reinforcement to consumer audio electronics, a collaborative acoustic control methodology developed by Quickfilter Technologies and Real Sound Lab enables engineers to control frequency response for system performance optimization. Combining CONEQ™ (CONvolution EQualizer) software-based technology with the QF1D512 programmable digital filter, the approach generates a speaker transfer function
Charge Pump Drives up to Six LEDs
March 16, 2008 1:49 pm | Product Releases | CommentsCatalyst Semiconductor, Inc. introduced the CAT3637 fractional charge pump LED drivers which address the requirements for high-efficiency and easy LED programming in portable devices. It is optimized for applications with one bank of five or six identical LED channels, a typical configuration for larger LED screen portable products. It incorporates a simplified version of the company’s 1-wire EZDim interface, which supports 16 output power levels, from from zero to 30 mA full brightness
Blind Hollow Shaft Encoders Reduce Potential for Contamination
March 16, 2008 1:43 pm | Product Releases | CommentsVFS 60 blind hollow shaft encoders from Sick Stegmann, Inc. feature a unique nickel code disc that provides robust operation in harsh industrial environments, and tolerance to temperatures as high as 100ºC. They are IP65 rated and deliver from 1ppr to 10,000 ppr in an industry-standard 60 mm housing. The ball bearings that support the encoder shaft are spaced 30 mm apart for excellent concentricity (± 0.3/± 0.1 mm radial; ± 0.5/±0.2 mm axial) and robustness, and minimum encoder vibration
Intermediate-bus Power Controllers are Highly Integrated
March 14, 2008 12:40 pm | Product Releases | CommentsPresented as the first such single-chip devices on the market to integrate high-voltage (75-V) half-bridge MOSFET drivers with a 1.6-A peak current driving capability, the Vishay Siliconix SiP11205 and SiP11206 controllers are designed to work on the primary side of an isolated half-bridge intermediate-bus converter in telecom and network equipment and in 1/16-brick or 1/8-brick power modules. Providing current monitoring and control features, the self-driven synchronous-rectification controllers step down voltages with greater than 95 % efficiency with an input voltage range from 36V to 75V
Surge Protective Devices with Ratings from 40,000A to 200,000A
March 14, 2008 11:05 am | Product Releases | CommentsPhoenix Contact’s VALVETRAB-SQ surge protective devices (SPD) offer safe, reliable surge protection from 40,000A to 200,000A. The NEMA-style product series includes approximately 50 part numbers in three different mountable designs designated by CC (control cabinet), SP (sub-panel), and SE (service entrance) identifiers. The VAL-SQ CC Series offers an economical method of
Switch Requirements for Medical Applications
March 14, 2008 10:05 am | by Jerome Smolinski, Senior Product Manager, C&K Components | Articles | CommentsIn the area of medical switch components, current trends continue to call for further miniaturization to meet the needs of space-saving applications like hearing aids.
Reference Designs Create Low-Power Wireless Modules
March 14, 2008 6:17 am | Product Releases | CommentsProviding engineers the ability to create Ultra-Low Power (ULP) ISM-band button-cell powered wireless links, a family of reference designs using Nordic Semiconductor RF tranceiver chips require only a digital In/Out, power (+V) and ground (GND) connection for implementation. The seven module designs are based on the 2.4GHz nRF24L01 (RF Digital Modules RFD21010, RFD21676, RFD21677), nRF2401 (RFD21006), and nRF24E1 (RFD21018) and the 433/868/915MHz nRF905 (RFD21002), and nRF9E5 (RFD21014).
HDTV Image Processor for Embedded Systems
March 14, 2008 5:59 am | Product Releases | CommentsSensoray introduced a 1080i compatible HDTV image processor for embedded systems in the broadcast and medical markets. The Model 2246 captures an HDTV signal from an HD or SD-SDI source and formats it for display and image compression. Conventional analog video inputs are also accepted. Its high speed hardware can scale and add text/graphics prior to compression, display and storage. A scan converter section formats
Double Level PCB Terminal Blocks Saves Space
March 13, 2008 5:22 am | Product Releases | CommentsThe CTBDD93 series feature high quality rising clamp wire connections and are UL, cUL, CE, VDE and IMQ approved. They available in two standard pitches of 5 mm and 5.08 mm, and are ordered as separate male and female connectors. The two connectors can be mounted vertically, or at 90°, to suit different applications. The double level design of the male connector reduces the required space on the PCB by a half. The terminal blocks are molded in green UL94 V-0 flame retardant PA66, and are
High Temperature Preamplifier for Automotive Sensors Operates to +120°C
March 12, 2008 10:11 am | Product Releases | CommentsThe Automotive Sensors division of PCB Piezotronics announced a high-temperature preamplifier, designed to overcome high temperature testing challenges associated with NVH powertrain and vehicle underhood testing applications. The Model HT426E01 is a 1/2” preamplifier operating from ICP sensor power, terminating with a BNC connector and utilizing standard coaxial cables. The model also features a low attenuation factor
One Step Closer to Making OLEDs a Viable Option
March 12, 2008 7:46 am | Blogs | CommentsGE Global Research announced the successful demonstration of “roll-to-roll” manufactured OLEDs. The company claims that this process is a key step toward lower costs of the technology.
DSL Filter is Compatible with VDSL2 to 30 MHz
March 12, 2008 6:30 am | Product Releases | CommentsExcelsus brand Z-301LS in-line xDSL filter from is compatible with VDSL2 and can filter frequencies up to 30 MHz. The lightweight 51.3 mm × 19.6 mm × 19.0 mm filter has good intermodulation distortion performance which allows the maximum possible VDSL2 data rates. The 600 Ohm return loss is greater than 14 dB.
Thermal Substrate Targets High-Output LED Apps
March 11, 2008 10:18 am | Product Releases | CommentsUsing copper and aluminum layers 0.0042" and 0.062" respectively with a dielectric 0.004". thick with a breakdown of 4kVDC, OptoTherm OCB201 Series substrate from Optek has a thermal conductivity of 1.1W/m-°K and a thermal resistance of 1.8°C/W. Compliant with UL-94 V0 flammability specifications
