Serving the Electronic Design Community Since 1956
USB Optically Isolated Input and Solid State Relay Output Module Each Switch Up to 2A
May 22, 2008 8:38 am | Product Releases | CommentsACCES I/O Products added the Model USB-IDIO-16 to its line of USB/104 I/O modules. The unit features 16 individually optically isolated inputs and 16 fully protected solid state FET outputs capable of switching up to 2A each. The USB-IDIO-16 is fully compatible with both USB 1.1 and USB 2.0 ports and offers
SMT LEDs Deliver up to 1,900 mcd for LCD Backlights
May 22, 2008 7:19 am | Product Releases | CommentsAvailable in versions providing a light output of up to 1,900 mcd, a family of SMT LEDs from JKL Components are intended for use in BLUs (backlight units) for liquid crystal displays. Providing a 120° viewing angle, the side-mounted white LEDs include the ZSM-S2808-W, a 2.8 × 1.2 × 0.8-mm emitter with a luminous intensity (at 20 mA) of 1,400 mcd max, and the ZSM-S3806-W
ESMexpress Module Performs in Low Power, High Processing in Rugged Embedded Applications
May 21, 2008 11:03 am | Product Releases | CommentsMEN Micro offers the ESMexpress-based XM50 that is presented as providing COMs-style cost and time saving benefits for rugged, mobile and mission-critical embedded systems. ESMexpress is currently in the process of ANSI-VITA standardization (ANSI-VITA 59, RSE Rugged System-On-Module Express). With the PowerQUICC III MPC8548 processor operating at
DAC Provides 16-bit Linearity
May 21, 2008 8:32 am | Product Releases | CommentsOffering six software-programmable output ranges, the LTC2755-16 quad 16-bit current output digital-to-analog converter (DAC) from Linear Technology provides 16-bit linearity (±1LSB (max) INL and DNL) over the industrial temperature range without any adjustment. Each DAC output can be individually programmed through a parallel interface or can be pin-strapped for operation within a single range.
Interconnect Family Features Contacts to Reduce Broadside Coupling and Crosstalk
May 21, 2008 8:16 am | Product Releases | CommentsSamtec expanded its Board-to-Board and Cable-to-Board line featuring a rugged Edge Rate contact. These systems are designed for applications where signal integrity and durability are critical. The specially designed contacts are asserted to offer impedance matching, reduced broadside coupling and crosstalk, and high cycle life. Board level systems include the
Tricolor LEDs Perform in Displays and Signage
May 21, 2008 7:51 am | Product Releases | CommentsDesigned to meet indoor and outdoor LED screen requirements for better screen resolution (greater than 12 mm pixel size), Avago’s ASMT-YTB0 LEDs have six leads to enable individual color control of each chip. Features of the PLCC-6-packaged silicone-encapsulated devices include a 115° viewing angle , an MSL 2a moisture sensitivity level
Ultra-Slim RGB Micro LED Device Delivers High Brightness for in-coupling Into Light Guides
May 20, 2008 7:56 am | Osram Opto Semiconductors | Product Releases | CommentsThe RGB MicroSIDE LED from OSRAM Opto Semiconductors features an ultra-slim design and delivers high brightness for in-coupling into light guides designed for backlighting in space-sensitive applications. Featuring three individual color chips, the device is presented as having the highest
SSLD Boards for Industrial, Medical LCDs Tout Low Power Consumption
May 20, 2008 7:09 am | Endicott Research Group | Product Releases | CommentsEndicott Research Group (ERG) has released two Smart Force solid state lighting driver (SSLD) boards as standard products for industrial and medical LCDs. The SFDE (Economical) and SFDM (Mini) Series provide full function power supplies for high brightness as well as low power consumption, low cost and a compact size.
6-Channel Encoder Handles Industrial Applications
May 19, 2008 9:02 pm | Product Releases | CommentsDesigned to enable the reduction in overall motor sizes, Avago’s AEDT-9340 encoder module targets Brushless DC motors used in industrial and factory automation equipment. The device includes a lensed LED source and a detector IC enclosd in a small plastic package with a switching accuracy of ±1°
“Challenge X” Vehicles Strut Their Stuff In Manhattan
May 19, 2008 6:56 am | by Alix Paultre | Blogs | CommentsIt may have been a cold and damp morning in Manhattan, but that didn’t damp the passions of the participants in the Challenge X national collegiate engineering competition. This year’s challenge, sponsored by the US Department of Energy and General Motors, focuses on technology integration and full-vehicle development of advanced alternate-technology drivetrain and subsystems. By participating in the Challenge X program, the students gain real-world engineering skills and hands-on learning to better prepare them for a future career in engineering.
DSP: From Ideas to Implementation
May 19, 2008 5:08 am | Articles | CommentsA variety of tools simplifies the trip from abstract DSP models to real signal-processing hardware.
SSLD Drives 2.5-inch AMOLEDs
May 16, 2008 12:37 pm | Product Releases | CommentsDriving the next generation of handheld devices, the TPS65136 solid-state lighting driver (SSLD) from Texas Instruments manages power to AMOLED (active-matrix organic light-emitting diode) displays up to 2.5" with a buck-boost topology that allows the device to generate a positive voltage up to 4.6 V and adjustable negative output voltage down to -7 V.
PoE Midspans Deliver Over 33 W Per Port
May 16, 2008 11:00 am | Phihong | Product Releases | CommentsIn full compliance with power specifications released in draft 3.0 of the IEEE802.3at, a family of power-over-ethernet (PoE) midspan power injectors from Phihong can provide up to 33.6 W per port. Available in single-, 4-, 8- and 16-port models, the devices support demanding peripherals such as new IEEE802.11N broadband access points.
ECN Brainstorm: Near-field Communications
May 16, 2008 8:14 am | Articles | CommentsFor line of sight near-field bidirectional wireless communication applications would you rather use IrDA light-based methodologies or RF?
