Serving the Electronic Design Community Since 1956
Synchronous Data Acquisition Products Offer High-speed Performance Over Ethernet
March 19, 2008 6:54 am | Product Releases | CommentsDATAQ Instruments announced the DI-785 and DI-788 Ethernet data acquisition models. Multiple units, separated by over 100m, can synchronize at samples rates as high as 180 KHz per unit by simply daisy-chaining ordinary CAT-5 cables between them. With up to 32 fully isolated channels per box, and support for as many as eight simultaneously connected boxes
Switching Regulators are Pin Compatible
March 19, 2008 6:27 am | Product Releases | CommentsMEGA Electronics’ M78 0.5A and 1.0A switching regulators are suited to replace 78xx linear regulators and are pin compatible. With efficiencies up to 96 percent very little energy is wasted as heat, eliminating the need for heat sinks and reducing overall weight. The regulators include a thermal shutdown, short circuit protection with continuous automatic recovery and low ripple and noise. Normal operating temperatures are from
Front End Supply Crams 400W into 1U Without Added Airflow
March 19, 2008 5:57 am | Murata Power Solutions Inc. | Product Releases | CommentsIntended for use as a front-end supply in a distributed power architecture requiring 12V bulk power, the CEF400-112C AC/DC supply has an integral fan to enable it to deliver 400W continuously in a 1U package from 0°C to +50°C without additional external airflow. The 4.0" × 7.0" × 1.55" PFC device accepts from 85 to 264VAC or 120 to 300V DC and provides a 12V main with a standby 5V auxiliary output
IGBTs Exhibit High Power Dissipation in Solar Inverter Apps
March 18, 2008 11:09 am | International Rectifier | Product Releases | CommentsUsing the latest-generation field-stop trench technology to reduce conduction and switching losses, the IRGB40xxDPbF family of 600V IGBTs from International Rectifier reduces power dissipation by up to 30percent in UPS and solar inverter applications of up to 3 kW. The devices are optimized for switching at 20 kHz with a collector-to-emitter saturation voltage from 1.95V to 2.20V and currents from 4A to 48A with a internal soft-recovery diodes
Precision Amplifier Offers 20 fA Guaranteed Input Bias Current
March 18, 2008 10:58 am | Product Releases | CommentsNational Semiconductor introduced the LMP7721 precision amplifier 20 fA guaranteed input bias current at room temperature and over the extended temperature range of -40°C to 125°C. According to the company, the device yields maximum system sensitivity and accuracy from photodiode and high-impedance sensors and is suited for improving sensitivity and accuracy in battery operated portable applications
RGB Color LEDs Offer 150° Viewing Angle
March 18, 2008 6:23 am | Product Releases | CommentsConsisting of 3 separate emitters in a 1204-size SMT package (3.2 x 1.0 x 1.5mm) compatible with automated assembly as well as IR and vapor-phase solder reflow, the OVSRRGBCC3 RGB LED provides adjustable-color llight with a viewing angle of 150°. Deployable in a top- or side-mount orientation with a white diffused lens
Low Profile MIL-STD-1553 Dual Transformer with Side-by-side Configuration
March 18, 2008 5:51 am | Product Releases | CommentsBeta Transformer Technology Corporation introduced the DSS-2000 dual transformer with and ultra low profile 0.130” maximum height. The device has a side-by-side configuration and is available in ratios compatible with 3.3V, 5.0V, 12V, and 15V transceivers. The 0.130” height makes suitable for today’s smaller MIL-STD-1553 board topologies and has ratios to meet both long and short stub applications
SMT LEDs Present Sub-Millimeter Profile
March 17, 2008 11:28 am | Product Releases | CommentsProvided in a CLCC-6 FlatPackage configuration, the VLMW621 family of warm-white SMT LEDs is presented as having the lowest profile (0.9mm high) of its type. The ceramic-encased InGan devices are available with luminous intensities from 1800mcd to 7100mcd and thermal resistances of 40K/W junction to pin and 90K/W junction to ambient. The devices have a 140 mA forward current, a 4.3V maximum forward voltage, and 650 mW of power dissipation
Collaborative Equalization Methodology Combines Software and Hardware
March 17, 2008 9:11 am | Product Releases | CommentsUseful for applications from professional sound reinforcement to consumer audio electronics, a collaborative acoustic control methodology developed by Quickfilter Technologies and Real Sound Lab enables engineers to control frequency response for system performance optimization. Combining CONEQ™ (CONvolution EQualizer) software-based technology with the QF1D512 programmable digital filter, the approach generates a speaker transfer function
Charge Pump Drives up to Six LEDs
March 16, 2008 1:49 pm | Product Releases | CommentsCatalyst Semiconductor, Inc. introduced the CAT3637 fractional charge pump LED drivers which address the requirements for high-efficiency and easy LED programming in portable devices. It is optimized for applications with one bank of five or six identical LED channels, a typical configuration for larger LED screen portable products. It incorporates a simplified version of the company’s 1-wire EZDim interface, which supports 16 output power levels, from from zero to 30 mA full brightness
Blind Hollow Shaft Encoders Reduce Potential for Contamination
March 16, 2008 1:43 pm | Product Releases | CommentsVFS 60 blind hollow shaft encoders from Sick Stegmann, Inc. feature a unique nickel code disc that provides robust operation in harsh industrial environments, and tolerance to temperatures as high as 100ºC. They are IP65 rated and deliver from 1ppr to 10,000 ppr in an industry-standard 60 mm housing. The ball bearings that support the encoder shaft are spaced 30 mm apart for excellent concentricity (± 0.3/± 0.1 mm radial; ± 0.5/±0.2 mm axial) and robustness, and minimum encoder vibration
Intermediate-bus Power Controllers are Highly Integrated
March 14, 2008 12:40 pm | Product Releases | CommentsPresented as the first such single-chip devices on the market to integrate high-voltage (75-V) half-bridge MOSFET drivers with a 1.6-A peak current driving capability, the Vishay Siliconix SiP11205 and SiP11206 controllers are designed to work on the primary side of an isolated half-bridge intermediate-bus converter in telecom and network equipment and in 1/16-brick or 1/8-brick power modules. Providing current monitoring and control features, the self-driven synchronous-rectification controllers step down voltages with greater than 95 % efficiency with an input voltage range from 36V to 75V
Surge Protective Devices with Ratings from 40,000A to 200,000A
March 14, 2008 11:05 am | Product Releases | CommentsPhoenix Contact’s VALVETRAB-SQ surge protective devices (SPD) offer safe, reliable surge protection from 40,000A to 200,000A. The NEMA-style product series includes approximately 50 part numbers in three different mountable designs designated by CC (control cabinet), SP (sub-panel), and SE (service entrance) identifiers. The VAL-SQ CC Series offers an economical method of
Switch Requirements for Medical Applications
March 14, 2008 10:05 am | by Jerome Smolinski, Senior Product Manager, C&K Components | Articles | CommentsIn the area of medical switch components, current trends continue to call for further miniaturization to meet the needs of space-saving applications like hearing aids.
Reference Designs Create Low-Power Wireless Modules
March 14, 2008 6:17 am | Product Releases | CommentsProviding engineers the ability to create Ultra-Low Power (ULP) ISM-band button-cell powered wireless links, a family of reference designs using Nordic Semiconductor RF tranceiver chips require only a digital In/Out, power (+V) and ground (GND) connection for implementation. The seven module designs are based on the 2.4GHz nRF24L01 (RF Digital Modules RFD21010, RFD21676, RFD21677), nRF2401 (RFD21006), and nRF24E1 (RFD21018) and the 433/868/915MHz nRF905 (RFD21002), and nRF9E5 (RFD21014).
