Advertisement
Serving the Electronic Design Community Since 1956
Subscribe to ECN Magazine All
View Sample

FREE Email Newsletter

ECN Daily

PTFE-Based Sealing Material

October 31, 2007 6:16 am | Product Releases | Comments

Trelleborg Sealing Solutions announced its Turcon Variseal PTFE-based system that is compatible with virtually all chemical media. Combined with optimal wear resistance and friction characteristics, it has the ability to withstand extreme operating temperatures. The system is energized with a spring fitted into the seal profile that is fully enclosed within a case so there is no possibility of metal extractables entering the system.

Silicone Cables

October 31, 2007 6:12 am | Product Releases | Comments

Cicoil Corp. announced its high performance silicone cable assemblies that are found on military jet aircraft in applications such as targeting pods, fuel control systems and missile gimbal and guidance systems. Features include high flexibility, the ability to be shaped to fit tight spaces, low weight and a broad temperature range extending from -65°F to +260°F.

Surface Mount Insulation Piercing Crimp Terminal

October 31, 2007 6:06 am | Product Releases | Comments

Zierick Manufacturing Corp. introduced its surface mount insulation piercing crimp terminal and the tools that terminate a wire to surface mount printed circuit boards. This method of termination combines the advantages of crimping, insulation piercing and surface mount technology. The system consists of a surface mount terminal and a terminating machine that feeds the wire into the connector and makes the termination.

Advertisement

Compact Stopper Blocks and Brackets

October 31, 2007 6:02 am | Product Releases | Comments

Misumi USA, Inc. announced its compact stopper blocks and stopper brackets for machine and assembly builds. The stopper blocks are available in low-carbon steel with black oxide or nickel plating, as well as 304 stainless steel. Configurable heights in 1 mm increments from 3 mm to 20 mm are offered with compact counterbore design for flush fitting in tight spaces.

PTFE Terminals for High Temperature Applications

October 31, 2007 5:35 am | Product Releases | Comments

Keystone Electronics Corp. announced a selection of rugged, press-in type PTFE (Teflon) insulated terminals for high temperature and high quality terminal and connector applications. Engineered for high density packaging on .062 and .093(TH) PC boards, these terminals provide optimal electrical, mechanical, thermal and chemical characteristics. Rugged and resistant to mechanical shock and vibration, they operate within the temperature range of -85°F (-65°C) to +400°F (204°C).

Stackable Plug-Connector System Increases Installation Flexibility

October 31, 2007 5:29 am | Product Releases | Comments

Phoenix Contact introduced its T-Box and M12 adapter cover as part of its DUPLICON product range that offer installation flexibility. The T-Box is a compact alternative to stackable power distributor sets, and its contact insert has two screw connections per terminal for looping the power cable. The cable outlet on the additional stacked housing on the T-Box set can be plugged in any of the four directions.

High Flex Round Cable

October 31, 2007 5:23 am | Product Releases | Comments

W. L. Gore & Associates added high flex round cable to its online design tool, giving equipment designers more standard cable selections. The tool provides step-by-step instructions for configuring proprietary high flex cables (flat or round) or trackless cable from standard components. The round cable is available in two forms: single core with jacket for diameters less than 10 mm, and hybrid round cable configurations for combining multiple core components into one cable design

30W DC/DC Converter has 4:1 Input

October 31, 2007 5:11 am | Product Releases | Comments

V-Infinity introduced a line of 30W DC/DC converters. The VSCQ30 series is compact, has a wide 4:1 input range, and excels in environments where space is at a premium and high efficiency is demanded. The pin mount version measures 2” x 1.6“. This series also has an available “T” chassis mount version for mounting convenience.

Advertisement

Ceramic Antennas for Powering Multi-RF Devices

October 30, 2007 12:48 pm | Product Releases | Comments

Ethertronics unveiled its compact Savvi ceramic antennas that include a Bluetooth-only version and a GPS/Bluetooth combination product. Suitable for powering a variety of multi-RF technology electronic devices, these miniature antennas use a proprietary technology with high isolation characteristics that make them immune to frequency shifts.

Four-Resistor Network Improves Stability

October 30, 2007 12:41 pm | Product Releases | Comments

Vishay Intertechnology, Inc. announced its SMNZ ultra-high-precision Z-Foil four-resistor network that provides a low absolute TCR of ±0.05ppm/°C from 0°C to +60°C and ±0.2ppm/°C from 55°C to +125°C, a PCR tracking of 5 ppm at rated power, a tolerance match of 0.01 percent and a load life ratio stability of 0.005 percent.

TOPICS:

Wi-Max Antenna Catalog

October 30, 2007 12:32 pm | Product Releases | Comments

Laird Technologies introduced its Wi-Max antenna catalog that combines all of the company’s high performance Wi-Max antennas into one comprehensive guide. The catalog describes base station antennas, backhaul antennas, fixed and mobile client antennas, vehicular and in-building antennas. A product description, some specifications, product drawings and performance graphs are included for each product listed.

Color Driver for High Power LEDs

October 30, 2007 12:24 pm | Product Releases | Comments

Dialight Lumidrives launched Colourdriver XP, its LED driver high power LEDs that provide LED users in the architectural, entertainment and leisure industries with more choice over the control of color changing LEDs. The driver meets the needs of high power LEDs like Luxeon K2, and it provides high power operation up to 1,000 mA with the option of a white or amber mix in addition to the three standard RGB channels.

High Efficiency, High Power LEDs

October 30, 2007 12:20 pm | Product Releases | Comments

Cree, Inc. announced its cool-white LEDs with 129 lumens per Watt and its warm-white LEDs with 99 lumens per Watt. These packaged, high-power LEDs for solid-state lighting were tested by NIST at 350 mA, and the outputs were measured after five minutes of operation to ensure thermal stabilization.

Advertisement

LED Driver Boards

October 30, 2007 12:16 pm | Endicott Research Group | Product Releases | Comments

Endicott Research Group (ERG) released two Smart Force LED driver boards as standard products for a range of industrial LCDs. Both provide full function LED drivers in a compact size with wide range dimming, wide input voltage and full brightness and enable control. Smart Force LED rails are also available for use with the driver boards to provide thermal management.

TFT Modules with Sunlight Readability

October 30, 2007 12:11 pm | Product Releases | Comments

Phoenix Display International (PDI), Inc. introduced its line of 2.2" TFTs with QCIF+ (176 × 220) resolution. These sunlight-readable LCDs offer high brightness, contrast and color saturation with optimal transflective properties for outdoor applications. The TFT cells are manufactured using high aperture panel technology, high transmittance color filters and high transmission polarizers that result in a clear and bright display that is suitable for high ambient light or outdoor, high brightness applications.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading