Meeting international specifications for harsh environments, Datatronics’ 4283-1200 and 4283-1250 Series transformers operate in line and portable medical devices, such as defibrillators, industrial lasers, ion generators for powder coating and painting equipment, cathode ray tube transformers and traveling wave tube transformers. The flyback
Storing multiple input video feeds for later review and analysis, BVM Limited’s MP-6010 mini-PCI and PCI video capture card works in security and surveillance video systems. The component offers 4-channel video and audio inputs with independently-configurable compression parameters, a single video and audio output channel, and programmable
Running in frequency ranges from 200 MHz to 239 MHz, Crystek’s CVCO55FL-0200-2039 VCO exhibits a typical phase noise of -123 dBC/Hz at 10 KHz offset. The 0.5” × 0.5” SMT-packaged component offers typical output power of 9 dBm, input voltage of 5 V and a control voltage range from 0.5 V to 4.5 V. The oscillator
Complying with VITA 41.0 specifications and the VITA 38 specification for system management, Elma Bustronic’s 8-slot VXS backplane utilizes a Star routing topology and backplane simulation for signal performance. The 6U-high device includes
Operating with an input voltage range from 1.8 V to 5.5 V, Fairchild Semiconductor’s FPF22xx Series IntelliMAX load switches include undervoltage lockout (UVLO), thermal shutdown and current limiting. The J-STD-020- and RoHS-compliant components offer
Working with 120 VDC to 370 VDC supplies, RECOM Electronic’s RAC-SB Series of 5 W and 10 W single-output AC/DC power supplies exhibit universal inputs ranging from 90 VAC to 264 VAC. The 2” × 1” encapsulated PCB mount or panel mount devices present five output voltage options ranging from 3.3 VDC to
Previously analog-to-digital converters (ADC) at high input frequencies were limited in usefulness due to distortion and noise performance. Today, however, ADCs can provide nearly 9.5 bits of effective number of bits (ENOB) at radio frequencies (RF) of 1 GHz with signal bandwidths greater than 200MHz. Such performance at high frequencies eliminates a mixer stage, simplifying receiver design to improve overall system performance.
When engineers tackle a project that uses ZigBee communications they may get a surprise. Unlike point-to-point communications, ZigBee involves a network that can establish nodes, repeaters and complex mesh topologies. The proper test tools--often called "sniffers"--help engineers diagnose ZigBee-network problems that could otherwise turn into nightmares.
Designed for open-loop applications, Analog Devices’ AD529x family of single-channel 10-bit programmable digital potentiometers offer less than 1% end-to-end resistor tolerance error over a supply voltage of ±15 V. The 14-lead TSSOP-packaged products use the iCMOS modular manufacturing process to combine CMOS and bipolar technologies to enable the device to support dual power supplies in the ±10.5 V to
Operating in medical instrumentation and commercial-grade industrial control and telecommunications systems, Astrodyne’s EFM30 and EFM30/M Series modular AC/DC switching supplies meet EN55022, Class B standards for EMC noise performance. The 3.41” × 2.36” × 0.93” devices exhibit universal input acceptance from 90 VAC to
Operating with full load convection cooling from 0°C to ~45°C, DongAh Elecomm’s PSU-750 Series of 750 W switching power supplies demonstrates 1,500 W peak load capability for up to 5 minutes. The 13.38” × 4.570” × 1.970” open frame components include universal AC input with active power factor correction
California Eastern Laboratories’ ZIC2410 Series of ZigBee transceiver ICs combine a ZigBee-compliant RF transceiver with an 8051-based 8-bit microprocessor. The QN48- or VFBGA72-packaged devices offer a receiver sensitivity of -98 dBm, link budget of 106 dB and maximum output power of 8 dBm. The system-on-chip
Working as a low dropout driver (LDD), Catalyst Semiconductor’s CAT4101 linear-based constant-current SSLD operates with a LED pin compatible up to 25 V. The 5-lead TO-263-packaged component drives strings of up to 10 LEDs adjustable to 1 A. The driver offers current sink of 1 A via an external resistor, dropout voltage of
Measuring 5” × 3” × 1.75”, Applied Motion Products’ SV Series servo drives deliver up to 7 A rms continuous or 14 A rms peak output current from a 24 VDC to 80 VDC power supply. The devices provide 8 digital inputs, 4 digit outputs, 2 analog inputs and a RS232 or RS485 communication interface. The drives use a digital PID loop with
Handling harsh and rugged operating environments, AVX’s SMX and CHX Series stacked ceramic capacitors perform in temperatures up to 200°C. The devices offer a maximum capacitance of 340 microfarads at 25 V and a maximum voltage rating of 500 V. The switch mode power supply capacitors are suitable for high transient