Productive Product: Absopulse Electronics releases its CSI 100-EU series, a 100 VA sine wave inverter in Eurocard plug-in format, measuring 3U × 160 mm × 10 HP. This compact, lightweight design is suitable for modular rack-mount applications in industrial, utility, telecom, mobile and rugged environments. This inverter provides regulated sinusoidal output voltage
PowerGate LLC introduces the Mean Well PID-250 series of open-frame, dual-channel power supplies with independently regulated and controlled outputs, making them suitable for motor based applications that previously required two power supplies and a much higher rating for motor start-ups. The PID-250 series features a V1 output of 12V DC, 24V DC, 36V DC and 48V DC rated for 180W~225W of continuous power and up to 170 percent peak load capability with a
Astrodyne Corp. announces its ASL150 series of high density, open frame switching power supplies that meet the space and performance requirements for instrumentation, control and telecommunication systems. Delivering 150W of output power, these compact units exhibit power densities greater than 17W/in3. A 1.08¨ profile makes them appropriate for 1U applications. All models accept universal input from 90V AC to 264V AC, and four models are available that provide single outputs
National Semiconductor Corp. introduces two 12-bit 170 mega-sample per second (MSPS) analog-to-digital converters (ADCs) and a 14-bit, 155 MSPS ADC, each with a full-power bandwidth of 1.1 GHz. Available in dual data rate, low-voltage differential signaling (LVDS) and CMOS output options, the ADCs are targeted at WiMAX and 3G wireless communications applications. In high intermediate frequency (IF) sampling receiver applications, their 1.1 GHz bandwidth capability provides
Productive Product: Lambda introduces its iQE series of quarter brick 100W to 200W isolated DC DC converters that have high operating efficiencies over a wide range of load conditions. Typical efficiencies of the series are 90 percent over a wide load range
Productive Product: Phihong USA announces its PSC20R series of 20W adapters that feature interchangeable plugs. The adapter is available with four interchangeable clip adapter plugs for use in virtually any power outlet around the world, allowing a single part number to be used, simplifying inventory and approvals. Applications include gaming machines, computer peripherals, network equipment and retail equipment. Measuring 3.9¨ × 2.5¨ × 1.4¨ and weighing 9 oz.
C&D Technologies announces its ADS-939 sampling A/D converter which is a fully integrated data acquisition system that gives true 16-bit resolution performance at a 10 MHz sampling rate over the entire operating temperature range up to full military. The functionally complete design requires no external components, and it is housed in a small, high reliability, hermetically sealed, 40-pin ceramic TDIP. Typical applications include medical imaging, radar, sonar, communications and instrumentation.
Lambda introduced a family of low cost, low noise and low profile 600W single output AC/DC power supplies that meet a wide range of indoor and outdoor applications including LED displays/signage, self-serve kiosks, automatic test equipment (ATE) and factory automation. The SWS600L series offers a choice of six different output voltages including 3.3V, 5V, 12V, 24V, 36V, 48V and 60V. For non-standard system voltages it boasts a wide output voltage adjustment range of up to ±20 percent.
Fujitsu Components America, Inc. adds three extended temperature range products to its standard off-the-shelf, resistive touch panel offering that feature an extended operating temperature range of -30°C to +85°C and a 10 percent to 90 percent operating relative humidity (non-condensing) range. An 88 percent-transmissive panel enhances readability for use in bright light or outdoor conditions. To reduce reflected light, a series of Index Matching coatings are applied to the panels’ glass and film surfaces.
Semtech Corp. announces its model SC4509 step-up converter for white LED backlight applications with an integrated Schottky diode in a 2 mm × 2 mm × 0.8 mm package. This converter can drive up to five white LEDs in series to provide a tiny system for small LCD displays. Its built-in Schottky diode saves board space while providing efficiencies of over 80 percent. To simplify control of the backlight, the device features a combination enable and PWM dimming pin
Kycon adds the KFOX and KFO42X Series to its optical audio line to provide space-savings in end consumer products such as digital televisions, set-top boxes and DVD/Audio components. Both series, which comply with JEITA standards, offer a split-gate transmitter and receiver option. The KFO42X Series is available as a stacked optical with an RCA jack, stereo jack or mini-DIN option.
Apollo Display Technologies offers a range of kitted TFT LCDs that include proprietary LCDs and industrial single board computers (SBCs) from IBASE Technology, USA. These systems consist of a display, adapted industrial single board computer and all the accessories that are completely tested and ready for use. Depending upon the applications, these systems can consist of as many as 10 coordinated components.
Agilent Technologies, Inc. introduces its N7781A compact high-speed polarization analyzer that provides comprehensive capabilities for analyzing polarization properties of optical signals. The N7782A PER analyzer is designed for high-speed and highly accurate testing of the polarization extinction ratio (PER) in PM fibers. The real-time measurement capability, in combination with automation interfaces, makes this unit suitable for integration in manufacturing systems like pigtailing stations for optical components.
WAGO Corporation announces its Luminaire Disconnects Series 873, the LUMI-NUTS, that are members of the WALL-NUTS push-wire family of terminals. They meet NEC 410.73(G), CEC 30-308(4) and the CSA/UL Standard 2459 for insulated multi-pole splicing wire connectors for those servicing non-residential linear fluorescent fixtures with ballasts. Features include the ability to daisy-chain power from one ballast to another, eliminating additional connectors.
AMS Technologies announces VueMetrix Inc.’s Vue-MV-21 laser diode controller that has high-power, low-noise, and it offers 10A, 21V operation. Able to operate more diodes in series than with an earlier version, this laser diode system control allows the acceleration of product development by using the same platform for development and the final product. The platform includes user-settable power current and operating temperature limits.