Advertisement
Serving the Electronic Design Community Since 1956
Subscribe to ECN Magazine All
View Sample

FREE Email Newsletter

ECN Daily

RJ45 Jacks Integrate Magnetic Isolation

February 2, 2009 8:55 am | Product Releases | Comments

With features such as integrated magnetic modules to isolate common and differential-mode interference, a family of RJ45 LAN jacks from EPCOS is available in single, dual and quad-port versions. Able to withstand a breakdown voltage of 1,500 VAC, the connectors have an insertion loss of -1.0 dB, with values of -16 dB and -40 dB for the reflection loss and crosstalk, respectively. The components can operate over

Linear Drive Touts High Resolution

February 2, 2009 8:52 am | Product Releases | Comments

Featuring pure analog throughput for high brushless motor resolution, the TA333 High Power Linear Drive from Trust Automation can be configured to interface with any motion controller with a ±10 VDC command output. Able to achieve currents up to 25 A, the drive uses an external 24 VDC source of power for the internal logic. With ±100 Volt, the drive measures 14.9” x 7.7” x 4.7.”

AMOLED Display Lasts over 30,000 Hours

February 2, 2009 6:48 am | Product Releases | Comments

Demonstrating a resolution of 240 × RGB × 320 with up to 262,000 colors, OSD Displays’ OSD0283AMQV-T 2.8” diagonal QVGA Active Matrix Organic LED (AMOLED) module exhibits a lifetime rating of >30,000 hours. The device supports 18-/16-/6-bit RGB (DCLK, VSYNC, HSYNC, DE) and Intel/Motorola MPU 18-/16-/9-/8-bit bus interfaces. The 49.10-mm × 67.70-mm × 1.85-mm unit presents typ. luminance of

Advertisement

Voltage Measurement Instruments Offer 48 Inputs

February 2, 2009 6:29 am | Product Releases | Comments

Addressing lithium-ion cell-by-cell determination, Data Translation’s VOLTpoint Series precision voltage measurement instruments include 48 separate 24-bit resolution inputs each with its own A/D converter for direct connection to a PC via

Thermally Conductive Adhesives Dissipate Heat to 500ºF

February 2, 2009 6:09 am | Product Releases | Comments

Combining high-temperature resins and conductive fillers, Cotronics’ Duralco 132 thermally conductive adhesives form bonds with continuous service at up to 500ºF. The products are suitable for bonding and assembling heating coils, cooling coils, heating elements, heat sinks, reaction vessels, semi-conductors, rectifiers, and

Crystal Oscillators Exhibit Low Jitter

February 2, 2009 5:55 am | Product Releases | Comments

Covering from 150 MHz to 220 MHz, Pericom Semiconductor’s 2.50-V and 3.30-V SX and SN Series, and 3.30-V SD and SH Series XP crystal oscillators demonstrate a typ. phase jitter of 0.25 ps rms for CMOS and PECL clock applications, respectively. The components present peak-to-peak jitter of 40 ps, max. power consumption of

On Solid-State Lighting

February 2, 2009 5:37 am | Product Releases | Comments

This podcast is a discussion of Solid-State Lighting in the international marketplace. Solid-State Lighting (SSL) is poised to change the world, or at least the way we illuminate it, and technologies such as OLEDs and LEDs are at the vanguard. In addition, SSL is also behind the latest breakthroughs in high-definition televisions and projectors, the leaders in consumer technology spending. This discussion will examine where SSL is currently being used, where it is going, and what you can do with it.

Carrier Supports Four LXI Function Cards

February 2, 2009 4:41 am | Product Releases | Comments

Running the Linux 2.6 kernel via a 300-MHz processor, Bustec's ProDAQ 6100 LXI function card carrier provides access for up to 4 Bustec ProDAQ function cards through a standard Gigabit LAN interface. The 1U 19” half-wide device offers an accuracy of 20 ns via synchronization of the data acquisition and Ethernet clocks to

Advertisement

Mini 3-A Converter Boasts Integrated Inductor

February 2, 2009 4:39 am | Product Releases | Comments

Delivering an output of 3 A in a 28-mm² package, the EN5337QI synchronous buck DC/DC converter from Enpirion has an integrated inductor for a power density of 149 W/in². The 5-MHz device accepts an input from 2.375 V to 5.5 V and operates at an efficiency as high as 92%.

Battery Charger IC Enhances Internal Protection

February 2, 2009 4:20 am | Stmicroelectronics | Product Releases | Comments

Operating in cell phone handsets, STMicroelectronics’ ESDA8V-1MX2 battery charger IC absorbs mains-borne surges containing peak pulse energy of up to 500 W. The 1-mm × 1.45-mm × 0.55-mm unit offers a 50% reduction in leakage current, which reduces drain on the battery for improved performance and longer recharge

The Dangers of Exporting E-waste

January 30, 2009 11:27 am | by by Ken Manchen, Newark & Premier Farnell | Blogs | Comments

As readers of ECN well know, Americans are purchasing new and improved electronic products faster than ever—and thereby creating a record amount of electronic waste. What you may not know is that 50% of the e-waste generated in the European Union and North America is now exported to developing countries such as India, China and Africa.

TOPICS:

DRAM Chip Is Densest Available

January 30, 2009 10:50 am | Product Releases | Comments

Using 50-nm process technology, the 4Gb DDR3 DRAM chip from Samsung is presented as having the highest density available. The chip can be produced in 16-GB registered DIMMs for servers, as well as 8-GB unbuffered DIMM, and 8-GB small outline DIMM.

Coax Cables Connect Digital Apps

January 30, 2009 8:20 am | Product Releases | Comments

The Banana Peel plenum DS-3 and DS-4 Series of coax cables from Belden are designed for digital signal interconnect and cross-connect applications. Available in 26 AWG (735A plenum-rated) and 20 AWG (734A plenum-rated) sizes in a 3- and 6-count configurations. Features include

Advertisement

Motion-Control Cards Operate in Multiple Modes

January 30, 2009 7:40 am | Product Releases | Comments

Accepting a control voltage from 5 VDC to 24 VDC, the VMC-3000 Series of single-axis plug-in motion controller modules from Varedan are DSP-based cards that configure in a variety of modes including position, torque, and a frequency-locked velocity mode. The controllers accept quadrature encoder feedback

Experimentation Kit Generates Thermoelectric Power

January 30, 2009 6:56 am | Product Releases | Comments

Suitable for demonstrating the Seebeck effect, Tellurex’s PG-1 thermoelectric power generation experimentation kit supplies a net output of ~0.75 W and an adjustable output voltage from 3 VDC to 14 VDC. The fully-assembled unit can be used to charge batteries, run fans, or power LEDs, music devices, and phones. The self-contained device works by attaching the removable legs and applying heat using a canned fuel source. The kit includes

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading