Advertisement
Serving the Electronic Design Community Since 1956
Subscribe to ECN Magazine All
View Sample

FREE Email Newsletter

ECN Daily

PAR30-Style LED Spotlight Delivers 367 Lumens

February 26, 2009 5:26 am | Product Releases | Comments

Accepting an input from 85 VAC to 260 VAC, the 15-degree narrow-beam PAR30A LED bulb from LED is made up of five 3-W, high-power LEDs and replaces filament-based 75-W incandescent or halogen bulbs.

SSLDs Enable Next-Gen LED Designs

February 26, 2009 5:15 am | Product Releases | Comments

Addressing the higher currents needed by the next generation of high brightness LEDs, the RCD-24-1.0 and RCD-24-1.2 solid-state lighting drivers (SSLD) from Recom are available in versions delivering up to 1,200 mA. The 22 × 12.5 × 8.5-mm devices require no external components, reducing the circuit footprint by up to 50%. Features include short circuit protection and thermal shutdown as well as independent PWM and Analog linear dimming inputs

Kazakhstan Withdraws from Central Asian Power Grid

February 26, 2009 5:00 am | Product Releases | Comments

Kazakhstan announced Thursday it was pulling out of the Central Asian power grid to protect its energy supplies, a move that forced rolling blackouts and electricity rationing on Kyrgyzstan, its tiny, power-starved neighbor. Kazakhstan said it had to withdraw from the power grid because Tajikistan was taking more energy from the grid than it was producing.

Advertisement

Temperature Compensation Engine Open for Licensing

February 26, 2009 4:44 am | Product Releases | Comments

Leadis Technology announced that its proprietary LED-Sense temperature sensing and compensation engine, implemented in the LDS8160, is now available for licensing to third parties as an embedded, stand-alone IP block. This IP engine, suitable for enhancing the performance of LED driver, light management unit, and power management unit ICs, directly measures the junction temperature of an LED in the system at its

Toolkit Integrates Mechanical System/Control Software Design

February 25, 2009 12:02 pm | Product Releases | Comments

Enabling software and mechanical engineers to work together to design, test, and modify custom motion algorithms, Danaher Motion’s MechaWare 3.0 mechatronic toolkit seamlessly integrates mechanical systems and control software design. The product includes capture, logging, and visualization tools that allow mechanical, I/O, and software data to be integrated into one measurement environment. The toolkit delivers

Quad-Channel VGA Exhibits 24-dB Gain Range

February 25, 2009 8:22 am | Analog Devices, Inc. | Product Releases | Comments

Designed for PET scanners, communication systems, and advanced video equipment, Analog Device’s AD8264 quad-channel VGA (variable-gain amplifier) demonstrates a 24-dB gain range. The 40-lead LFCSP-packaged component has auxiliary differential ADC drivers operating with ADI’s data converters. The device’s pinout provides single-ended output taps directly from the VGAs, which have a -3-dB bandwidth of

Portable Data Loggers Offer Multiple Inputs

February 25, 2009 7:59 am | Product Releases | Comments

Targeting industrial, scientific research, and quality assurance applications, Omega Engineering’s OM-SQ2020 Series portable data loggers have 8 true differential or 16 single-ended universal analog inputs, plus 2 high voltage, 4 pulse, and 8 digital event/state inputs. The devices work with thermistors, thermocouples, 2-, 3-, or

Three-Phase Power Supplies Yield High Output

February 25, 2009 7:33 am | Product Releases | Comments

Presenting an adjustable 24-VDC output voltage, Carlo Gavazzi’s SPD Series 3-phase switch-mode power supplies deliver outputs of 120 W, 240 W, 480 W, and 960 W. The DIN rail-mountable devices exhibit up to 93% efficiency, input voltage ranges from 340 VAC to 575 VAC and 480 VAC to 960 VAC, and

Advertisement

VCO Operates at 1,700 MHz

February 25, 2009 7:14 am | Product Releases | Comments

Exhibiting typ. phase noise of -120 dBc/Hz at 10-KHz offset, Crystek's CVCO55CC-1700-1700 VCO functions at 1,700 MHz with a control voltage range from 0.3 V to ~4.7 V. The 0.5” × 0.5” SMT component offers typ. output power of 2.5 dBm, input voltage of 5 V, max. current consumption of 25 mA, and typ. second

Development Kit Creates Wall-Wart

February 25, 2009 6:28 am | Product Releases | Comments

Said to draw <1/10 of the power of a typical PC being used as a home server, Marvell Semiconductor’s SheevaPlug development kit is small enough to plug directly into a wall socket. The platform uses a Kirkwood embedded processor based on an embedded 1.2-GHz Sheeva CPU equipped with 512-MB Flash and

Jet System Prints Cabon Nanotube Transistors

February 25, 2009 6:01 am | Product Releases | Comments

Optomec announced today that its Aerosol Jet system has been used to fully print Carbon NanoTube (CNT) based Thin Film Transistors (TFT) with operating frequencies over 5 GHz. The work was conducted in collaboration with the University of Massachusetts and Brewer Science. The results were recently published in APPLIED PHYSICS LETTERS (93, 243301 2008) with a paper titled “All [aerosol] jet-printed carbon nanotube thin-film transistor on a polyimide substrate with an ultrahigh operating frequency of over 5 GHz.”

Certess Announces C-Level Functional Qualification Tool

February 25, 2009 5:51 am | Stmicroelectronics | Product Releases | Comments

Certess today announced Certitude-C, the next generation of its functional qualification software product for companies developing SoCs or integrating intellectual property (IP) blocks using C. Certitude-C adds support for ANSI C to the capabilities of the original product, allowing functional qualification of both reference models and high-level representations of designs written in C.

EEPROM Devices Feature Lowest Operating Voltage on Market

February 25, 2009 5:33 am | Product Releases | Comments

With a 1.5 V rating for both Read and Write operations, a series of I2C EEPROM devices from Microchip is purported to have the lowest operating voltage available on the market. Operating current is below 400 microamperes. The devices feature an operating frequency of 100 kHz at 1.5 V, and are available in densities of

Advertisement

Tactile Switches Last to One Million Actuations

February 25, 2009 5:29 am | Product Releases | Comments

With an extended life to one million actuations, the KSC741 and KSC721 tactile switches from C&K Components are intended for high reliability applications. Current rating for the momentary action, SPST, normally open devices ranges from 1 mA to 50 mA for silver plating and 1 mA to 10 mA for the gold plating

Reference Design Creates Complete LCD Power System

February 25, 2009 5:16 am | Microsemi Corporation | Product Releases | Comments

Combining the main system power with the backlight inverter, the GreenPoint open reference design for LCD TV power supplies from On Semiconductor eliminates a complete power conversion stage, improving overall system efficiency, simplifying the design and reducing the bill of materials. The 180-W design meets IEC 61000-3-2 for harmonic content requirements, and exceeds global standby requirements with a typical standby power consumption of 400 mW with a 50-mW load.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading