Offering a Form A or Form B configuration, Hasco Components’ REED-PILL reed switch and matching magnet delivers a magnetic gap of ¾”. The product exhibits a switching voltage of 12 V, life expectancy of >100,000 cycles, and technologies that protect the reed blades in an inert gas. Each set comes with 3M adhesive and 18” 26 AWG wire, with
With an industry standard footprint of 2" by 4" by 1.07", the single-output ZPSA40 and ZPSA60 series of compact pcb-mountable AC-DC power supplies from Lambda meets conducted and radiated EMC requirements of EN55022-B and FCC Class B (without additional filtering or components). The power supplies are available with output voltages from 3.3 V to 48 VDC
With an active PFC function to satisfy industrial, IT, and data network applications, the PS-S10 and PS-S100 Series miniature DIN rail switching power supplies from Altech can be installed on DIN rail TS-35/7.5 or 15, and can be cooled by free air convection (up to 60º C or 140º F). These 10W-100W single-output power supplies install with universal AC input (88-264 VAC)
Akros Semiconductor, Hall A4 Booth 242 at electronica, demonstrates its AS1135 Power over Ethernet (PoE) Powered Device (PD) controller implemented into a communication board driving the PoE-powered 22-W LCD display above it (see photo). The component implements the 2-Event Physical Layer
Offering sizes of 15”, 17” and 19”, Planar Systems’ PL flat-panel LCD monitors and PT touchscreens are now available in white. The devices exhibit white color compatibility with Apple Mac computer systems, and are appropriate for use in healthcare, point-of-sale, education, and hospitality applications. The PT line presents a five-wire resistive touchscreen and a dual serial/USB touch interface in standard 4:3 sizes. The PL line specifically targets
Employing an external Schottky diode, Intersil’s ISL8500 buck PWM regulator powers an internal-switching N-channel power MOSFET that generates an output voltage from 0.6 V to 19 V. The 4 mm × 3 mm 12-lead DFN-packaged component presents an input voltage of up to 24 V, output current of up to 2 A, a fixed switching frequency of 500 kHz, a simple voltage mode with integrated input voltage feed forward control. The unit exhibits overcurrent, undervoltage, and
Compliance and compatibility are critical factors in the design of medical electronics equipment. The following are responses to questions posed by ECN regarding how vendors address certification issues and what types of testing are required.
Designers of portable medical devices face unique challenges. Their chosen field is known for regulatory scrutiny, protracted design and life cycles, and a need for unparalleled robustness in the finished product. In addition, design objectives that are common to all electronics can have special significance when it comes to medical devices. For example, low power consumption is always an objective for designers of portable electronics. Less power means a smaller and lighter battery, which enhances portability.
Functioning from 3,901 MHz to 4,101 MHz, Crystek’s CVC055CC-3901-4101 VCO exhibits a typical phase noise of -104 dBc/Hz at an offset of 10 KHz. The 0.5” × 0.5” SMT component demonstrates a control voltage range from 0.1 V to ~16 V, typical output power of 5 dBm, input voltage of 8 V, and a maximum current consumption of 40 mA. Pulling and pushing are
Pairing with a compatible wave washer, PennEngineering’s PEM SpotFast Type SFW self-clinching fasteners create a flush-attachment connection between two thin metal parts in applications requiring repeatable pivoting or hinging action. The steel components have zinc plating with lubricant, can attach dissimilar metals or sheets with different thicknesses, and work in steel or
Using a data center-grade transformer, Power Distribution’s Wavestar 400 kVA, 625 kVA, and 750 kVA power distribution units (PDUs) display PDU critical functions and the Branch Circuit Monitoring System (BCMS) in a single monitor. The Wavestart monitoring system can also provide these points remotely to the building management system via Modbus or SNMP. The devices offer an input voltage of 480 VAC at 60 Hz, input current from 481 A to 903 A at 480 VAC, output voltage of
Operating from 60 MHz to 200 MHz, RIGOL Technologies’ DS1000B Series four-channel sampling oscilloscopes demonstrate a real-time sample rate of up to 2 GSa/s and an equivalent sample rate of up to 50 GSa/s. The LXI-certified instruments exhibit one-touch automatic setup, a proprietary ASIC front end, digital filtering, pass/fail testing, record and playback, and I/O capabilities, such as
Targeting test and measurement equipment, Panasonic Electric Works’ SON (Small Outline No-lead) Series PhotoMOS relays come in a 2.95 mm × 2.20 mm × 1.40 mm package. The ceramic-constructed components come with gold-plated leads, side solder fillets, and a MSL 2 rating. The product lineup consists of the CxR5 C-type with a load voltage of 25 V, and
Using an IP67 (NEMA 6) housing and fully-encapsulated electronics, Banner Engineering’s T30UX U-GAGE-housed ultrasonic sensor performs in hostile environments. Applications include liquid level monitoring in tanks; Web loop control, slurry monitoring in vats; clear bottle detection; automotive glass detection, and repeatable detection of targets of various color. The device offers a sensing range from 100 mm to 3 m, a single analog or user-configurable discrete output, and
With 128-byte FIFOs, a two-port PCI Express serial interface adapter (the COMM+2.PCIe) from Sealevel Systems supports 9-bit framing and is software compatible with legacy 16550 UART applications. The serial ports on the COMM+2.PCIe are individually configurable for RS-232, RS-422, or RS-485. The 14.7456 MHz oscillator and the UART’s flexible clock prescaler support standard