Providing serial, digital, and analog I/O expansions in the front and rear on a 1.75” chassis, Sealevel Systems' Relio R4000 rackmount computer features dual 10/100BaseT Ethernet, two high-speed USB 2.0 ports, four serial ports
Intended for use in precision instrumentation, Vishay Intertechnology’s DG-series of analog multiplexers and switches have leakage currents ranging from 0.25 to 5 nA. Provided in a leadless 1.80 x 2.60-mm
Uni-Pixel, Inc.has developed a new thin film it calls Opcuity FPR (Finger Print Resistant) that can be applied to
The NAG Toolbox for MATLAB® released by the Numerical Algorithms Group is a toolbox that gives users access to
Measuring 0.380” × 0.380” × 0.220”, voltage-controlled oscillator is presented as the smallest such device of its type. Operating from 3,660 to 3,700 MHz at a tuning voltage range from 0.300 to 4.7000 VDC, the device has an output power of +4.000 dBm (typ.) for a 50-O load with a supply of +5.000 VDC. With a typical consumption of 30 mA, the SMT oscillator has pushing and pulling levels
Keeping optical power constant during temperature changes and over the device’s lifetime, Micrel’s laser diode driver includes automatic power control with fault indicator, TXenable/disable
E-paper can also bend like the newest OLED and LCD displays, but is much more energy efficient as it is a bistable (only uses power when changing the image) system that does not require a backlight. Readable in any light regular paper is, e-paper promises to create a new means of accessing information that will challenge traditional paper media. This e-paper display (EPD) from LG Display uses e-ink core tech and LG driver and backplane technology.
The Automotive Sensors division of PCB Piezotronics (PCB) released a series of acoustic sensors for use in automotive testing applications such as legislative certification, quality control, system and component performance, and vehicle and powertrain NVH, including measurements for
What would SID be without cool and different new display technologies and ways to use them?
The SID International Symposium, Seminar and Exhibition was held May 18 to 23, 2008 at the Los Angeles Convention Center in California. The biggest trends exposed at the exhibition were OLED commercialization, microprojectors, 3D imaging, E-paper, Flexible and non-rectangular LCD, and LED backlighting of every flavor. Here are some photographs from the event.
Suitable for display-dimming feedback in portable devices, notebooks, and automotive applications, the MLX75304 Light-to-Frequency SensorEyeC from Melexis has a dynamic range in excess of 100dB. Incorporating photodiode, transimpedance amplifier, and output stage onto one chip, the sensor provides a frequency output to increase precision under all lighting conditions while simultaneously simplifying the sensor interface.
Intended for applications where ground-loop noise is a concern, a family of rack-mounted signal conditioners provide galvanic isolation for each input to output with a choice of Integrated circuit piezoelectric sensor (ICP), multiple charge input sensitivities (0.1, 1, 10 mV/pC)
Consisting of the EC-8560 ExpressCard and PXI-8565 PXI card, the multi-slot ExpressCard-to-PXI extension system from ADLINK Technology provides additional PXI slots for a laptop via a shielded cable connection up to 23’ in length. PXI devices installed in the extension PXI do not
Presented as the first such devices of their type, the 15- and 30-W CGH55015F and CGH55030F gallium nitride (GaN) HEMT transistors from Cree are intended for use in WiMAX applications covering the 4.9 to 5.8 GHz frequency band. Providing a four-fold increase in efficiency
Featuring active current-share, remote on/off control and inverter-operation-good (IOG) functions, Lambda’s PFE500F AC/DC power module delivers up to 504 W. Available in versions providing 12, 24 or 48 V, the active PFC module accepts 85 to 265 V at 47 to 63 Hz with an input to output isolation of 3 kV and an input surge immunity level of up to 6 kV with application