Utilizing PCI Express 2.0 and 6-Gb SAS speeds, ATTO Technology’s ExpressSAS H608 and ExpressSAS H680 SAS/SATA host adapters supply a full-duplex connection to SAS/SATA storage of up to 8 GB/s. The ExpressSAS H608 offers 8 internal
Operating from -40°C to 85°C, Hittite Microwave’s HMC700LP4E fractional-N and HMC698LP5E and HMC699LP5E integer-N synthesizer ICs exhibit a phase noise of -108 dBc/Hz with FOM in the order of -227 dBc and -153 dBc/Hz at 10-kHz offset from a 100-MHz, 0-dBm signal, respectively. The 8-GHz HMC7000LP4E has a 16-bit fractional divider, 24-bit delta-sigma modulator, 14-bit reference path divide, charge pump, and
Exhibiting a temperature accuracy of ±0.15°C, Data Translation’s DT9871U (for USB) and DT8871U (for Ethernet) TEMPpoint temperature measurement instruments demonstrate noise of <±1.5 uV. The tools use up to 48 dedicated 24-bit A/D converters, up to 48 dedicated CJC circuits, 16 (8/8) and opto-isolated digital input and output lines. The instruments offer 1,000-V channel-to-channel galvanic isolation, constant throughput across
Performing in a single standard 8-, 16-, or 32-bit PIC MCU or 16-bit dsPIC DSC, Microchip Technology’s mTouch inductive touch-sensing technology allows designers to incorporate inductive touch-sensing functionality with their existing application code. The product enables devices to work through plastic, stainless steel, aluminum, gloves, and surfaces containing liquid. Implementation details are available via a free download from
Coming in a 5 mm × 20 mm ceramic package, Littelfuse’s 477 Series time-lag cartridge fuses demonstrate a voltage rating of 500 V at 8 A or above. The RoHS-compliant devices exhibit ampere ratings from 0.5 A to 16 A, an interrupting capability of up to 1,500 A at 400 VDC, and recognition from UL, CSA, and SEMKO. The products are appropriate for 3-phase power supplies, uninterruptable power systems (UPSs), motor control
Now that power via media-dependent interface (MDI) was added to the IEEE 802.3af Standard, data terminal equipment (DTE) can receive power over existing data transmission cables. The IEEE 802.3af Standard defines the requirements associated with providing and receiving power over the existing cabling. The power sourcing equipment (PSE) provides the power on the cable, and the powered device (PD) receives the power.
Created to address the increasingly popular “preventative safety” features in new vehicles, the 32-bit SH74504 and SH74513 microcontrollers (MCUs) from Renesas Technology feature on-chip flash memory and peripheral sets tailored for driver-assist systems. Examples of such “proactive” in-vehicle features include lane-departure warning systems, adaptive cruise control functions and blind-spot monitors.
Coming preassembled for Profibus and Ethernet users, Binder-USA’s M12 shielded panel-mounted male or female connectors offer a receptacle that is attached to a shielded cable with a twisted pair of AWG 22 wires. The Profibus receptacles come in a front- or rear-mount design for mounting to control cabinets, and the die-cast zinc housing has a galvanic
Offering 10 case sizes from 9 mm² to 64 mm², NIC Components’ NPIS_L Series shielded SMT power inductors demonstrate inductance values from 0.800 µH to ~220 µH in ±20% (M) and ±30% (Y) inductance tolerance. The devices present IRMS current ratings from 1.400 A to 7.800 A, an operating temperature range from -25°C to ~120°C (80°C operation at rated IRMS current), DC resistance from 0.006 Ohm to ~4 Ohm, and Sn-Ag-Cu
Featuring a four-finger beryllium copper contact clip with jack-screw fixing, the Datamate J-Tek Reverse Fix family of connectors from Harwin offers a fixing variant reversed from the usual orientation. The connectors are suited for use in environments where high vibration, shock, and extremes of temperature are
For members of the electronics supply chain, going “green” is not just a short-term marketing scheme rife with buzzwords but short on substance. Granted, the tech sector has jumped on its share of bandwagons, but this movement is different. It’s not just about pioneering technologies, building a positive public image, padding the bottom line or even “doing the right thing.” It’s all of the above. When state-of-the-art electronic products are energy efficient, environmentally sustainable, and cost effective, everyone wins.
Targeting semiconductor failure analysis, OptoTherm’s latest version of the Micro thermal imaging system offers a thermal imaging camera upgrade. The camera upgrade includes a 320 × 240 element uncooled detector, sensitivity of 0.05°C, a 20-µm microscopic lens, a wide angle lens, and a 16-bit digital Camera Link interface. The product measures and displays
Combining the AC input rectification function and power factor correction (PFC), and the DC-DC isolation, PFE1000F power modules from TDK-Lambda provide an output power of up to 1,008 W. The models are available with 12-V, 28-V, and 48-V nominal outputs that can be adjusted ±20 percent
Targeting legacy applications, the LPM-LX800-G STD Bus single board computer (SBC) from WinSystems provides both an upward performance migration path and a continued source of supply for STD Bus SBCs, while maintaining hardware, software, and I/O compatibility. The SBC can be populated with up to 1 GB of system DRAM
Designed to allow plug-and-play test and FPGA configuration without a computer, cable, or software, Intellitech’s UltraTAP-BT Bluetooth-enabled IEEE 1149.1/JTAG pod comes with non-volatile test program and failure memory. 1149.1/JTAG-based tests occur via the UltraTAP-BT Flash memory at a continuous test clock rate of up to 50 MHz, and test flow, test scripts, and third-party Serial Vector Format files download over a USB connection to