Providing monitoring and activation functionality for chemical, petrochemical, and other manufacturing applications, the 48-bit USB-4751and 24-bit USB-4751L USB data acquisition modules support wet or dry contacts as inputs with software-programmable six/three 8-bit ports configurable as input or output. Features include an event counter and three 16-bit timers which can be cascaded to become a 32-bit timer.
Taiyo Yuden’s CKP2520 multilayer chip power inductors offer DC resistance from 0.08 ohms to 0.15 ohms and current ratings from 1.4A to 1.1A, improvements of 35 percent and 44 percent compared to the company's previous models. With an EIA 1008 case size footprint of 2.5 mm × 2.0 mm and a maximum height of 1.0 mm and inductance values from 1.0 µH to 4.7 µH, the devices are suitable for
Providing a Complete dsPIC Digital Signal Controller (DSC) Development System, the MPLAB Starter Kit for dsPIC DSCs (part # DM330011) comes with all required materials, including a USB-powered DSC board with integrated debugger and programmer, MPLAB-IDE and -C30 C complier software, and sample programs and hardware for speech and audio applications.
Combining the performance of an ARM926EJ core, a VFP, a LCD Controller, an Ethernet MAC, and USB, the NXP LPC3200 line of microcontrollers offer embedded designers the ability to reduce on-chip components and maximize power savings. Designed for flexibility in applications that require fast, simultaneous communications, the LPC3000 combines high-performance, low power consumption and a myriad of peripherals.
Providing a 4× increase in resolution over traditional 16-bit devices (equivalent to more than 5½ digits of resolution for DC measurements), the National Instruments USB-6281 and USB-6289 DAQ modules feature an 18-bit analog input and ADC with sampling rates up to 625 kS/s (500 kS/s when scanning). The devices deliver an accuracy of 980 µV at ±10 V and 28 µV at ±100 mV and come with NI-DAQmx driver software and LabVIEW SignalExpress LE, measurement workbench. With features including programmable range and offset, the USB-6281 offers 16 SE and 8 DI analog input channels, two analog output channels, and 24 DIO channels while the USB-6289 has 32 SE and 16 DI analog input channels, four analog output channels, and 48 DIO channels.
Targeting office automation, telecommunications, consumer and industrial applications, the Allegro A4930 single-phase brushless DC motor pre-driver provides outputs that can drive N-Channel MOSFET H-Bridges with voltage ranges from 8V to 36V. Motor speed is regulated by either PWM or external analog voltage with programmable minimum speed and maximum motor current. Synchronous rectification is employed in the PWM off-cycle to reduce power dissipation, and startup current can be ramped up for reduced supply current surges and lock detection along with auto restart functions to reduce damage due to motor overheating.
CSR’s MusiCore1 single-chip stereo audio processor with Bluetooth overcomes the limitations of a phone CPU in handling both audio and voice processing. It supports decoding of all mainstream music file formats including MP3, AAC, AAC+, WMA and SBC, and its DSP architecture reduces the power required to process audio files: 5.25 mW for an MP3 file, compared to
Allegro MicroSystems announced Hall-effect sensors that are fully programmable with low noise and a high bandwidth. The A1360/1/2 devices are suited for use in high frequency, current sensing applications due to the low noise (down to 8 mV (p-p)), flat temperature coefficient (0 percent/°C) and high bandwidth capability (typically 50 kHz). They come in a 1 mm thin, four-lead SIP (KT-package), which allows for
Targeting embedded applications requiring audio functionality, 28-pin and 44-pin dsPIC 16-bit DSCs incorporate a dual-channel, 100ksps, 16-bit audio DAC module as well as 16 kB RAM (2 Kbytes of dual-port RAM) with 64 kB and 128 kB flash optional in the dsPIC33 model. Features of the DSP-capable device include two analog comparators, selectable 10-bit or 12-bit ADC, and a
Offering fully adjustable outputs, the dual-channel LTC3524 BIAS and white-LED driver can generate up to 25mA at 6V for the AVDD channel, and up to 2mA at 20V and -20V for the respective VGH and VGL bias requirements with controlled power-up/power-down sequencing. Able to operate at up to 90 percent with voltages from 2.5V to 6V, the 4mm2 QFN-packaged synchronous rectification device can power up to 10 white LEDs (5 per channel) while offering a dimming ration of up to 200:1.
Creating a driver and liquid-lens system to add auto-focus capability to compact handheld imagers such as cellular phone and PDA cameras, a partnership between Supertex and Varioptic combines the Arctic Series of liquid lenses with the HV895 family of inductorless liquid lens driver ICs. The RoHS-compliant driver/lens system does not have moving parts, and features include
Traditionally, IGBTs have addressed applications requiring high-voltage and -current ratings and relatively slow switching frequencies. When the switching frequency is low, the inherently low conduction losses resulting from the device’s low VCE(on) (collector-to-emitter saturation voltage), which derive from the IGBT’s minority carrier operation, outweigh the
portable instrumentation, active filters and analog to digital converter (ADC) buffers
Operating in the 2.4-2.5 GHz band with frequency capabilities of up to 3 GHz, the SKY13309-370 LF antenna switch targets Bluetooth systems and other applications, including analog and digital mobile television in emerging markets, wireless headsets, and receiver chain of phones. This pseudomorphic high electron mobility transistor (pHEMT) gallium arsenide (GaAs) integrated circuit (IC) switch has a positive low voltage control of 0/3V, low insertion loss of 0.5 dB at 2.5 GHz and isolation of 25 dB at 2.5 GHz.
Red Lion Controls, Inc. announced the PAXLA panel meters featuring control capability by adding two Form C relays capable of switching up to 5A. The meter accepts DC current, DC voltage or process input signals, scaling them to a desired readout for a wide range of applications. It delivers a bright 5 digit, 0.56" high red LED display with programmable scaling and decimal points, and offers a newly designed universal power supply, accepting 50V AC to 250V AC or 21.6V DC to 250V DC