Serving the Electronic Design Community Since 1956
High Voltage Power Supplies with PPM-Level Performance
December 11, 2007 11:03 am | Product Releases | CommentsUltraVolt, Inc. announced its E Series line of precision, enhanced power supplies that operate from 0 to 1 kV through 0 to 15 kV at 4W, 15/20W or 30W. The modules offer a high-resolution, programmable, high-voltage DC output that is optimized for bias or power applications. The line provides ppm-level performance. Each model features 0 to +10V remote programming, 0 to +10V monitors for output voltage and output current
High Density DC/DC Converters with 2:1 and 4:1 Inputs
December 11, 2007 10:58 am | Product Releases | CommentsPower Sources Unlimited announced its Tracopower THN-15 and THN-15WI Series of 15W high performance DC/DC converter modules that feature either a 2:1 input or a 4:1 input with tightly regulated, isolated, adjustable, single outputs of 3.3V DC, 5V DC, 12V DC or 15V DC. The THN-15 Series has a high density, using 1" × 1" of board space in a six-sided metal case with an insulated baseplate.
Power Supplies Available in 10 Output Voltages
December 11, 2007 10:53 am | Product Releases | CommentsLambda introduced its HWS1000 series of 1,000W power supplies. The single-output family is suitable for powering process control, ATE, factory automation and other equipment where extended life under extreme conditions is required. These power supplies meet the mandatory SEMI F47 power line sag specification. The units are available in 10 nominal output voltages including 3.3, 5, 6, 7.5, 12, 15, 24, 36, 48 and 60V.
Through-Panel Terminals have Industrial Power Filtering
December 11, 2007 10:40 am | Product Releases | CommentsWeidmuller introduced its WGK Series of through-panel terminal blocks that provide a universal system for industrial control power filtering and UPS systems such as frequency converters and power supplies. The terminal blocks feature housing halves that interlock and enable an easy-to-mount through-panel termination system. In addition to the standard versions with vertical or horizontal wire entry
ZIF Socket for 0.5 mm Pitch BGA
December 11, 2007 10:34 am | Ironwood Electronics, Inc. | Product Releases | CommentsIronwood Electronics introduced its model CG-BGA-5000 high performance BGA ZIF socket for 0.5 mm pitch BGA. It is designed for a 6 mm package size, and it operates at bandwidths up to 10 GHz with less than 1 dB of insertion loss. The sockets dissipate up to several Watts without extra heat sinking, and they can handle up to 100W with a custom heat sink. The contact resistance is typically
Twisted Pair Cables for In-Home Theater Applications
December 11, 2007 10:30 am | Product Releases | CommentsBelden announced its high definition multimedia (HDMI) shielded twisted pair cables that provide an interface between any compatible digital audio/video source and a compatible digital audio and/or video monitor in the home theater set-up, as well as providing support for standard, enhanced or high-definition video and multi-channel digital audio on a single assembly. Typical applications include connecting HDMI sources
Connector Doubles Contact Pin Density
December 11, 2007 10:26 am | Product Releases | CommentsXMultiple Technology, Inc. introduced its UltraJax connector that provides a high-density contact capability with a standard RJ connector. Contact assemblies are housed in both the top and the bottom so that one RJ connector becomes capable of performing the functions of two connectors. According to the company, this connector will double the port count of hubs, switches, routers and adapter cards, using less than half
Flexible Connectivity System with Insulation Displacement Blocks
December 11, 2007 10:22 am | Product Releases | CommentsWoertz announced its flexible connectivity system that uses a combination of insulation displacement technology and pluggable terminal blocks. This system provides rapid connections and expandability for power and data buses in industrial and commercial applications. Proprietary flexible power buses can handle up to 70A in flat cables with two to seven conductors. The data bus cables are available as shielded and unshielded
USB 2.0 Connectors for Automotive Applications
December 11, 2007 10:17 am | Product Releases | CommentsFCI introduced two USB 2.0 connectors that are suitable for use in automotive multimedia systems where connection to removable storage devices or other USB-enabled accessories is desired. The connectors comply with typical automotive application requirements in terms of temperature range and number of mating cycles. Standard USB Type A receptacles are available in both right angle and flag style options.
Expanded Selection Product Supplement
December 11, 2007 10:08 am | Product Releases | CommentsKeystone Electronics Corp. announced its multi-color, eight-page, new product supplement that features an expanded selection of micro-pins and micro-jacks along with an assortment of insulated terminals that are made of PTFE (Teflon) and molded diallyl phthalate materials. The pins and jacks are suitable for use with any printed circuit, front panel, board edge or height-specific application on a PCB. Receptacles are manufactured in press-fit, solder, swage and surface-mount styles in full compliance with
Microminiature Round Cable for Medical Applications
December 11, 2007 9:59 am | Product Releases | CommentsW. L. Gore & Associates launched an enhanced microminiature round cable for medical applications that include electrophysiology products and small diameter flexible endoscopes. Through the use of proprietary high strength toughened fluoropolymer (HSTF) and low dielectric constant expanded PTFE (ePTFE) material, this cable maintains its performance through device flexure, abrasion during routing, or tracking and sterilization
ZIF Connector for Small Consumer Electronics
December 11, 2007 9:55 am | Product Releases | CommentsFCI developed its YLL Series 0.3 mm pitch, low profile FPC ZIF connectors for mobile phone, digital still and video cameras, and display applications. The connector is available in two versions: the D-Series with down-side contacts at a maximum height of 1.0 mm, and the U-Series with upper-side contacts with a maximum height of 1.05 mm. Both versions have a front flip-type actuator for easy cable insertion.
Internal Cellular Antenna for Portable Devices
December 11, 2007 9:36 am | Product Releases | CommentsPulse introduced its model W3530 multi-hybrid, pentaband, internal cellular band antenna that combines 4-band GSM and W-CDMA 2100 to receive and transmit signals in all cellular bands. The antenna can be used in mobile, machine-to-machine, laptop, automotive and portable device applications for devices operating on GSM bands (GSM850, EGSM900, PCN1800, PCS1900) and W-CDMA 2100. It has a low
VCO Operates From 2,900 MHz to 3,400 MHz
December 11, 2007 9:32 am | Product Releases | CommentsCrystek Corp. introduced its CVCO55CC-2900-3400 VCO that operates from 2,900 MHz to 3,400 MHz with a control voltage range of 0.5V to 18V. The VCO features a typical phase noise of -107 dBc/Hz at 10 kHz offset, and it has optimal linearity. It is packaged in the industry standard 0.5" × 0.5" SMD package. Input voltage is 8.0V, with a maximum current consumption of 35 mA. Pulling and pushing are minimized
EMI/RFI Filters for Inverter Applications
December 11, 2007 9:27 am | Product Releases | CommentsEPCOS, Inc. announced its R105 Series of EMC filters for inverter applications such as servos and motor drives. The filters are compact, lightweight, and they offer attenuation of critical frequencies for inverter applications. They address radio frequency emissions from power electronics equipment that interfere with building automation
