Non-Volatile Digital Potentiometers with SPI Interface
December 11, 2007 9:18 am | Microchip Technology Inc. | Product Releases | CommentsMicrochip Technology Inc. announced its MCP4141/2, MCP4241/2, MCP4161/2 and MCP4261/2 non-volatile digital potentiometers. The 7- and 8-bit devices have an SPI interface, and they are specified over the extended industrial temperature range of -40°C to 125°C. They are available in several industry-standard packages, including the 3 mm × 3 mm DFN package. Non-volatile memory enables the devices to retain
Dual Slant WiMax Base Station Antenna
December 11, 2007 8:57 am | Product Releases | CommentsLaird Technologies introduced its 2.5 GHz 65° dual slant 45 WiMax base station antenna that is compliant with the ETSI EN 301.525 CS pattern specifications. The antenna operates across the 2.3 GHz to 2.7 GHz frequency band, and it features a 65° half power beam width and a 17 dBi gain in a compact package. The maximum null fill (-25°) feature insures consistent signal level throughout the wireless coverage area.
OCXO for Communication Synchronization Systems
December 11, 2007 8:55 am | Product Releases | CommentsBliley Technologies, Inc. announced its NV47AG ovenized crystal oscillator (OCXO) that features single stability and an ultra-low profile package. Available in frequencies from 5 MHz to 13 MHz, the oscillator was designed for synchronization systems, and it is suitable for base stations, test equipment, synthesizers and digital switching applications. The oscillator offers low phase noise options for both square wave and sine wave output signals.
EMI Filtered Audio Connectors for Harsh Environments
December 11, 2007 8:48 am | Product Releases | CommentsSpectrum Control, Inc. modified the standard MIL-DTL-55116 connectors that are used in 60V audio frequency circuits with 0.5A of current to provide effective EMI filtering. The connectors are waterproof and polarized; they have five- or six-pin electrical plugs/receptacles; and they can be designed for special and selectively loaded EMI filtering. These custom filtered connectors are suitable for military and civilian
Single Low Power Adjustable Resistor Family Provide Integrated Calibration Compensation Systems for Analog Circuits
December 11, 2007 7:35 am | Product Releases | CommentsMicrobridge Technologies, Inc. announced a family of low power, Low TC re-adjustable resistors designed to meet customer needs for a low cost, single element device to compensate and calibrate precision analog circuits. The single, low power Rejustor will emphasize how to calibrate devices and circuits for mass production.
Standard Enhanced LCD Displays with WEDC Enhancements
December 11, 2007 7:19 am | Product Releases | CommentsWhite Electronic Designs Corporation introduced a standard family of enhanced LCD displays. These standard LCD products can be used in market applications such as outdoor menu boards, medical devices and point-of-transaction devices. The 28 different LCD display models each offer a different combination of WEDC display enhancements, including the company’s Max-Vu technology.
Thirty-two Bit Microcontroller Line Plus Integrated Development Environment
December 11, 2007 7:14 am | Microchip Technology Inc. | Product Releases | CommentsMicrochip Technology introduced its PIC32 family of 32-bit microcontrollers (MCUs). The PIC32 family adds more performance and more memory while maintaining pin, peripheral and software compatibility with Microchip’s 16-bit MCU/DSC families, and it is fully supported by the MPLAB Integrated Development Environment (IDE) which supports the company’s complete portfolio of 8-, 16- and 32-bit devices. Launching with seven general-purpose members, the PIC32 family operates at up to 72 MHz
White LED Drivers with Integrated LDOs
December 11, 2007 7:03 am | Product Releases | CommentsAdvanced Analogic Technologies (AnalogicTech) announced its AAT2847, an integrated four-channel White LED (WLED) driver for portable systems operating off a single-cell Li-Ion/Polymer battery. The charge pump-based device also integrates two 200 mA Low Dropout (LDO) linear regulators, each with its own
High Side Current Sense Amplifier has Wide Input Range and Offset
December 11, 2007 6:54 am | Product Releases | CommentsLinear Technology announced the LT6105, a precision current sense amplifier with an input common mode range that extends from –0.3V below V-, up to 44V above V-. The common mode range of the LT6105 is independent of the positive supply voltage. Therefore the LT6105 can operate as a high-side or a low-side current sense monitor. It can continuously monitor current during a load short or power supply failure, as well as continuously monitor a battery from full charge to depletion
MEMS-Based SS Pressure Sensor Measures Gas and Liquids in High Purity Applications
December 11, 2007 6:27 am | Product Releases | CommentsAmerican Sensor Technologies AST4900 pressure sensors utilize Krystal Bond Technology and are free of oil-fill, welds and internal O-rings, all of which eliminate the risk of system contamination in extreme conditions. The media isolated pressure sensor also holds a CE EN61326 Certification and UL/cUL508 Approval.
Laser Diodes with a Lasing Wavelength of 830 nm
December 11, 2007 6:23 am | Product Releases | CommentsPhotonic Products introduced two high power, infrared wavelength GaAlaS laser diodes from Opnext, Inc. The HL8337MG and the HL8338MG are suitable light sources for industrial and medical sensor applications and as a light source for various other types of optical equipment such as distance meters, barcode scanners and high resolution CTP. The HL8337MG and the HL8338MG have a lasing wavelength of 830 nm typ and a high optical output power of 50 mW CW, a multi-quantum well structure, a package size of 5.6 mm and a built-in photodiode for monitoring laser output which allows for easier control of the auto power circuit.
Sanyo Laser Diode Catalogue Available As Free Download
December 11, 2007 6:15 am | Product Releases | CommentsPhotonic Products released is 2008 catalog available as a free download. The catalog's focus is Sanyo laser diodes from 405 nm to 830 nm. The range includes high power diodes for use with CD-R, industrial laser diodes at 635 nm, 808 nm laser diodes for use as a light source and for green laser modules, and 405 nm blue-violet laser diodes for next-generation optical disks and other industrial applications. Other catalog sections include diode pumped solid state green laser modules.
Industrial-Grade, Flash Storage Products Suited for Mission-Critical Applications
December 11, 2007 6:05 am | Product Releases | CommentsNetlist released an Industrial-Grade PC Storage Card, the second in the company's series of solid-state solutions for the Industrial Flash market. This Type II devicethat performs the same function as a hard disk drive and is designed for mission-critical applications requiring high levels in data integrity including telecommunications, voting, and military systems. It features a controlled
Programmable Industrial PCI Card for Specialized I/O Functions
December 11, 2007 5:31 am | Product Releases | CommentsThe 5I22 from Mesa Electronics is a general purpose, programmable, industrial I/O card for the PCI bus. It uses a 1M or 1.5M gate Xilinx FPGA for all logic. The FPGA configuration is downloadable from the PCI bus side, allowing creation of almost any kind of specialized I/O function. Features include four 50-pin connectors with I/O module rack-compatible pin-outs and interleaved grounds
MMD's Compact Ceramic SMD Oscillators with 1.54 MHz to 80 MHz Range
December 11, 2007 5:04 am | Product Releases | CommentsMMD Components, part of Monitor & Quartztek, introduced a RoHS-compliant oscillator series in a compact, hermetically sealed, surface-mount ceramic package. They are useful for devices such as mobile and cordless telephones, digital cameras, PDAs, and notebook computers. The MXH series oscillators measure 2 mm × 2.5 mm and are available in frequencies of 1.54 MHz to 80 MHz, operate at supply voltages of 1.6V DC and have a maximum power consumption as low as 8 mA.


