Serving the Electronic Design Community Since 1956
Measurement Suite Enable Desirable Repeatability in Optical Signal Measurement
January 7, 2008 6:59 am | Product Releases | CommentsAnritsu Company introduced a Stressed Eye Measurement Suite for its MP1800A series of Signal Quality Analyzers that offers desirable repeatability for measuring the average output power level difference (OMA), extinction ratio, and Vertical Eye Closure Penalty (VECP) of optical signals. The hardware and software solution provides designers and manufacturers of 10GBASE-L/10GBASE-E optical modules
Modular Motor Bearing Protection Ring for Simple Installation
January 7, 2008 6:51 am | Product Releases | CommentsA split-ring version of the Aegis SGR Bearing Protection Ring now is available in halves for easy field installation with little or no equipment disassembly. For variable frequency drive AC and DC motors, the SGR Split Ring protects bearings from electrical damage by channeling currents to ground. Conductive microfibers in the ring provide the path of least resistance, allowing these shaft currents to discharge safely
OEM Interface Controller Integrates Easily Into TFT LCD Monitor Applications
January 7, 2008 6:41 am | Product Releases | CommentsThe DVS-1600 high-integration OEM interface controller from Digital View is designed to address a broad range of TFT LCD monitor applications. The board’s flexible port architecture provides physical inputs for DVI, VGA, S-Video and Composite Video, along with a wide range of video modes.
Daydream or Wild Fantasy, But Still a Good Idea
January 7, 2008 5:14 am | Blogs | CommentsProductive Product: Sometimes technology ideas are so good and so obvious that we don't even dare to suggest them, for fear of being rebuffed with a sarcastic, "Yeah, right!" An example is the idea that all of life's gadgets could connect to a single universal power supply -- no more jumble
Connectors Meet AdvancedTCA Specifications
January 4, 2008 11:28 am | Product Releases | CommentsMolex Incorporated introduced its 170-circuit AdvancedMC connector solution for 12.5 Gbps NRZ signal transmission. The connectors support PIGMG AdvancedTCA industry specifications for next-generation mezzanine cards and are well-suited for a wide range of applications in the telecommunications, computing and IEEE 1386 markets, as well as non-ATCA applications.
Thermometers Provide Total Temperature Measurements for Industrial Applications
January 4, 2008 11:07 am | Product Releases | CommentsFluke Corporation announced the Fluke 566 and Fluke 568 Thermometers, which feature broad infrared (IR) temperature measurement functionality, an on-screen menu system and a dot-matrix display enabling users to take even complex. Both thermometers combine contact and non-contact temperature measurement capability in a single tool. The thermometers provide a broad temperature measurement range from -40°C to 800°C (568) or -40 °C to 650 °C (566) at one percent measurement accuracy
Fastener Access Hardware Helps Avoid Cross-Threading
January 4, 2008 9:29 am | Product Releases | CommentsPEM's threaded flare-in access hardware, MAThread, now has a captive screw assembly for permanent installation into almost any panel hardness or material. MAThread corrects off-angle installations to help align components and to push through clogged threads. Fastener caps are available in knurled (for operator access) or smooth (for service access) styles, and in thread sizes from #4-40 through ¼-20 and M3 through M6
LDO Controller Offers Adjustable and Fixed 1.2V and 1.5V Output Voltages
January 4, 2008 9:22 am | Product Releases | CommentsVishay Intertechnology released an LDO controller with adjustable and fixed output voltage options that uses external n-channel MOSFETs to provide extremely low drop-out voltages of under 50 mV at very high currents, up to 7A, with, according to the company, 80 percent efficiency. The SiP21301 device is designed for driving n-channel MOSFETs to power FPGAs, ASICs, and ASSPs in
Integrated, Low-Power, Single-Conversion Silicon Tuner Meets ATSC Requirement
January 4, 2008 7:32 am | Product Releases | CommentsMaxim Integrated Products' MAX3540 integrated, single-conversion television tuner for ATSC and NTSC applications meets the sensitivity and adjacent-channel guidelines specified by ATSC Recommended Practice A/74, while consuming 760 mW. The tuner integrates a tracking filter and high-linearity front-end. Additionally, it
Rail Systems With Custom Adjustments and Carriages
January 4, 2008 7:13 am | Product Releases | CommentsHaydon Switch & Instrument Inc.'s Linear Rail Systems product line uses a precision leadscrew assembly to provide controlled positioning along the axis of a linear slide. The system consists of a stationary base with a load-bearing carriage that travels along an extruded, wear-resistant aluminum rail. Motion comes from a standard or double-stack external linear actuator
General-Purpose I/O Card for Motion Control
January 3, 2008 10:02 am | Product Releases | CommentsMesa Electronics' 7I43A general-purpose, programmable I/O card connects to host computers via USB or PC parallel ports and can be a basis for applications such as simple GPIO, smart motion control (SoftDMC), host motion control (HostMot2), buffered step / direction generation, and as a waveform generator. The 7I43 is available with a 200K or 400K Xilinx Spartan3 FPGA for all logic. It also has has local configuration storage via onboard EEPROM.
Low-Power 300 MHZ to 930 MHz RF Receivers
January 3, 2008 9:45 am | Product Releases | CommentsMelexis announced the MLX71120 and MLX71121 integrated RF receiver series of automotive-qualified ICs with dual inputs. These are suited for low-cost antenna applications in unlicensed industrial-scientific-medical and short-range-device frequency bands in Europe and North America. The MLX71120 and MLX71121 feature an integrated FSK and ASK demodulator, 5 mm2 32-lead QFN package, and power range from 2.1V to 5.5V
Vector Signal Analysis Software with LTE Modulation Analysis Option
January 3, 2008 9:12 am | Agilent Technologies | Product Releases | CommentsAgilent Technologies Inc. added a 3GPP LTE modulation analysis option to its 89600 Series Vector Signal Analysis software to enable LTE signal analysis from baseband to antenna, on digitized or analog signals, both uplink and downlink. The 3GPP LTE option is designed to give R&D engineers
Boost Converter Manages Multiple High-Brightness LEDs
January 3, 2008 8:55 am | Product Releases | CommentsTexas Instruments Incorporated introduced an LED driver with an integrated 40V, 1.2A switch that can drive up to three 1W LEDs in series. The TPS61165 device’s features and input voltage range of 3V to 18V allow designers to manage multiple high-power LEDs used in single-cell, battery-powered applications or point-of-load designs with a 9V or 12V bus.
Reference Layout for HDMI 1.3 Based on Passives
January 3, 2008 8:48 am | Product Releases | CommentsTyco Electronics introduced its reference layout for ESD and over-current protection for HDM 1.3 interfaces. It uses proprietary 0.25 pF signal-to-ground-capacitance PESD protection devices and component placement and routing to help protect against ESD events. It also includes optional over-current protection on the +5V rail using the PolySwitch nanoSMD device. This ESD and reference layout
