Astro-Med's Test & Measurement Product Group introduced the Dash 2EZ+, a two channel, hand-held data acquisition system with integral chart recorder. It is capable of recording two channels of analog voltage channels along with one TTL event input to CompactFlash media at sample rates up to 40 kHz per channel. The unit also contains an integrated 3.1" strip chart recorder for hard copy printout.
Automation Products Group's PR Series Pulse Radar Level Sensors offer non-contact level measurement in challenging environmental conditions. Providing the process industry standard output of 4-20 mA, the sensors operate using a frequency burst at 6.3 GHz. Pulse Radar sensors provide a detection range up to 100 ft. (30m), resolution to 0.22 in. (5.7mm) and accuracy to
Advanced Analogic Technologies Inc. announced the AAT1160, a synchronous step-down DC/DC converter delivering up to 3A output from a 12V input. The device operates across a wide 4V to 13.2V input voltage range. It supplies a load current up to 3A with a fixed or adjustable output voltage which can be regulated to as low as 0.6V. The device supports efficiency levels up to 96 percent.
Linear Technology Corporation introduced its LTC3556 multi-function power management devices for Li-Ion/Polymer battery applications. It integrates a switching PowerPath manager, a stand-alone battery charger, ideal diode, I2C control, a synchronous buck-boost regulator, two synchronous buck regulators plus
Xilinx introduced three new devices and small form factor packaging to its 65nm Virtex-5 LX and LXT FPGA platforms. The addition of the Virtex-5 LX155 device to the logic-optimized LX platform, and the addition of the LX20T and LX155T devices plus a new small footprint 19 mm FF323 package to the Virtex-5 LXT platform with low
Constant-Current LED Driver Allows Multiple Devices to Be Cascaded and Programmed Via One Serial InterfaceJanuary 21, 2008 5:13 am | Product Releases | Comments
Catalyst Semiconductor, Inc. has expanded its recently introduced family of large LED video display drivers with the CAT4008, an 8-channel, constant-current sink LED driver for billboard, marquee, instrument and other large, general-purpose LED displays. The device’s LED channels can operate with an output voltage on the LED pins as low as 0.4V (for 2mA to 100mA LED current), to enable more power-efficient designs.
Dytran Instruments Inc. introduced an ultra miniature IEPE accelerometer which is laser welded in a titanium housing. Weighing in at just 0.2 grams, this miniature accelerometer successfully reduces mass loading effects. Because of its tiny “teardrop” design, the 3224A2 is suitable for vibration measurements in small locations. The model 3224A2 is available with a sensitivity of 2mV/g and can operate at temperatures up to 300°F.
International Rectifier introduced the IRS26302D protected 600V three-phase gate driver IC with ground fault protection. The IC has a seventh gate drive channel for a power factor correction (PFC) switch or inverter brake, making it well-suited to medium power appliance motor control and many other general-purpose three-phase inverter applications. The controller integrates power MOSFET/IGBT gate drivers
Agilent Technologies Inc. introduced a family of coaxial solid-state PIN diode switches -- including the P9400A/C transfer, P9402A/C SPDT and P9404A/C SP4T switches -- with a broad operating frequency range from 100 MHz up to 18 GHz for fast, accurate test in automatic test equipment (ATE) systems. Desirable isolation and ultra-fast switching speed make these switches suited for R&D and manufacturing engineers designing manufacturing test systems or requiring a fast switching solution to validate component performance.
E-Switch announced its modular MDP-16 Series of illuminated pushbutton switches. Its modular interface design features an attractive front panel and many illumination options. Actuator styles include a low or high bezel, and a flush mount or full guard option. There are six actuator colors to choose from. Specifications include electrical life of 6,000 cycles both silver and gold; mechanical life of 50,000 cycles typical; contact rating is
CAO Group introduced a High Flux Dynasty LED bulb, designed with a driver included in the base to provide constant current, transforming AC/DC low voltage to ~3.3 V. Available with both white and color LEDs, the bulb is screw-mounted on a waterproof 1156 base. With these standard connection bases, it is possible to
CIT RELAY & SWITCH offers the LPH Series bi-color, lighted pushbutton switch with numerous new cap options. Available with DPDT or 4PDT switch function, this versatile switch offers both momentary and latching styles. The LED color options available are red, green, yellow and blue – simply choose one or two colors for your application. Design engineers can choose the switch without a cap, a clear cap in two sizes or a misty silver style with 10 laser etching options.
CAO Group introduced a compact High Flux Dynasty LED bulb, designed with a driver included in the base to provide constant current, transforming AC/DC low voltage to ~3.3V. Available with both white and color LEDs, the bulb is screw-mounted on a waterproof 1156 base. With these standard connection bases, it is possible to
V-Infinity, a division of CUI Inc, introduced a series of high density, medically approved open frame switching power supplies. The VMS-160 series outputs 160W with 200 LFM forced air cooling or 100W under convection-cooled conditions. This translates to a power density of 18 W/in³ in a 1U, industry standard, 2” x 4” footprint. The power supplies are approved to both medical EN60601-1 and ITE EN60950-1 safety standards. This series delivers
Maxim Integrated Products introduced the MAX3624 and MAX3625 high-performance, quad/triple-output clock generators for network equipment. These devices use a low-noise VCO and PLL architecture to generate a high-frequency, ultra-low-jitter (0.36 psRMS) clock signal from a low-frequency crystal resonator or reference clock input. They help to reduce space requirements by only requiring an external