Delta Electronics, Inc. introduced the DNQ Family of Point-of-Load (POL), non-isolated converters into their Delphi Series of Board Mounted DC/DC power converters. The device operates from a 10V to 14V input range, provides 25A of single channel output current in a vertically mounted, through-hole or horizontally surface mounted package. It features a programmable output voltage via external resistors and is adjustable from a 0.8V to 5.5V output through this external resistor.
Kontron’s 6U CompactPCI Gbit Ethernet switch for high-end communications is available in three rugged levels. The Kontron CP6923 PICMG 2.16 compliant 6U CompactPCI managed Ethernet switch with 24 link ports and two 10GbE XFP uplink connections comes in three rugged levels defined as R1, R2 and R3. The R2 and R3 versions are available with
Rad-icon Imaging Corporation announced its Shad-o-Box 1024 Hi-Res x-ray sensitive imaging camera that utilizes the company's RadEye x-ray specific digital image sensor. This high-resolution, compact, stand-alone camera features a 14-bit output and parallel digital interface (LVDS) for direct input to a digital frame grabber. Total power dissipation is less than 6W.
New Scale Technologies added a smaller, lower-power module to its SQL-M line of SQUIGGLE micro-actuator modules. Each module incorporates a piezoelectric SQUIGGLE motor - claimed to be the world’s smallest linear motor – with optical limit switches in a compact polymer housing. The new SQL-M-1.8 micro-actuator module measures
Agilent Technologies introduced two options for its compact, low-power (<15 W), high-speed Acqiris 8-bit PCI digitizer. The U1071A-002 model option is an entirely new version of the PCI digitizer product introduced in 2007. It provides the 8-bit, dual-channel data conversion operation of its original, with up to 2 GS/s sampling rates and a reduced analog bandwidth of 500 MHz. Designed for applications with intense data-acquisition requirements, the memory options provide up to 256 Msample of acquisition memory, or 128 Msample per channel in two-channel mode.
Advanced Analogic Technologies Inc. announced today two mini-Power Management Units (PMUs) that combine three step-down DC/DC converters in a single monolithic IC. Targeted at portable devices, the 3-channel AAT2784 and AAT2785 allow designers to add one 1.5A synchronous step-down converter and two 300 mA synchronous step-down converters or one 1.5A synchronous step-down converter and two 600 mA synchronous step-down converters
Everlight Electronics Co. Ltd. introduced the 1W EHP-AX08/P01 and EHP-AX08/P03 3W high-power LED families. The emitters feature a silicon lens, high luminous flux (up to 90 lm/W) and low thermal resistance (15°C/W, Typ.). Sized in an industry-standard 8 mm x 8 mm x 5.7 mm SOP package, these LEDs are designed to handle higher reflow soldering temperatures
Elma Electronic Inc. announced an open frame chassis for test/debugging. The unit does not have side or back walls around the card cage area, leaving it open for easy access. The E-frame was designed with the high (and flexible) power and cooling requirements for VPX (VITA 46/48) systems, any 3U or 6U backplanes can be used. This includes VME/64x, VXS, CompactPCI, and other backplane architectures. The Type 39E Portable Tower has a convenient carrying handle
International Rectifier introduced the IR3514 and IR3507 XPhase chipset for AMD parallel and serial VID (PVID and SVID) processors. The IR3514 control IC enables designers to migrate from AMD processors requiring a parallel VID to SVID processors without the need to change the motherboard. Combined with the IR3507 phase IC, the IR3514 provides Power Saving Interface (PSI) capability to
Linear Technology Corporation announced the LTC3537, a 2.2 MHz, current mode synchronous boost DC/DC converter with integrated output disconnects plus an LDO. The devices's boost converter's internal 600 mA switches can deliver output voltages as high as 5.25V from an input voltage range of 0.68V at start-up (0.5V when running) to 5V, making it suitable for Li-Ion/Polymer or single/multicell alkaline/NiMH applications.
WAGO Corporation announced the 750-493 3-Phase Power Measurement Module that integrates comprehensive monitoring of a power supply network with the connectivity of an I/O system. At just 12 mm wide, the high-density, 6-channel 750-493 represents a cost- and space-effective solution to power system supply management. It is compatible with 16 different fieldbus networks (including Ethernet, Profibus, Modbus, and DeviceNet) and the 300+ digital, analog, and special function modules
The ZXLD132X Inductive DC/DC Converter Series from Zetex drives single or multiple LEDs with currents from 700 mA to 1.5A, in buck, boost and buck/boost configurations. The driver’s 3 mm × 4 mm DFN package is said to reduce the circuit footprint of existing designs by up to 50 percent. A variable “on/off” time-control scheme, with an adjustable peak switch current limit, makes chips simple to control. Both LED current and peak inductor current can be set accurately and independently.
SICK STEGMANN’s DFS 60 Incremental Encoders are available in blind hollow shaft versions. These blind hollow shaft encoders are designed to reduce the potential for contamination, making them suitable for use in dirty or dusty environments with water washdown cleansing. DFS60 blind hollow shaft encoders deliver from 1 to 65,536 ppr with reliable operation
MtronPTI introduced the XO5120 Series OCXO, an industry standard 1” x 1.4” single OCXO that offers desired phase noise combined with stability over a wide range of operating temperatures. The series offers phase noise capabilities at -155 dBc and performance at 10 kHz offset at 10 MHz nominal frequency. This series also provides +/- 2 ppb stability performance over commercial temperatures and +/- 3 ppb over industrial temperatures
Phoenix Contact introduced the FKCN 2.5 spring-cage plug connectors and compatible CCDN 2.5 base headers. The innovative push-in spring-cage technology allows rigid and flexible wires with ferrule to be connected quickly without any tools. The connector has a large wire entry so that it can safely support flexible wire ferrules. Wires can be disconnected easily using the orange actuation levers