LEDtronics announced its latest generation of PAR30-Style LED spotlight bulbs which is made up of five 3W high-power LEDs. They are direct incandescent PAR30 replacements, combining advanced Light Emitting Diode (LED) technologies, standard 25 mm Edison screw-in bases, and light optimizing designs producing 480 to 544 lumens of vivid light depending on the bulb model. They are available in a 40° light-emitting viewing angle, running on 80V to 260V AC current.
OKW Electronics has launched Camden Electronics’ CFTBN series fused terminal strips for wiring lighting equipment, power supplies, fire and security systems, and domestic equipment. The terminal strips incorporate a spare fuse option in the fuse carrier allowing technicians to immediately locate a replacement in the event of a blown fuse, resetting the circuit with minimum delay. The fuse carrier is suitable for glass and ceramic fuses, has a comfortable finger grip
Loadstar Sensors, Inc. announced the iLoad Mini miniature load cell, and the DQ-1000 versatile signal conditioning board that enables three different outputs: digital USB, 0.5V to 4.5V analog or 2 mV/V. The sensor offers ease of use in a rugged, low profile 1.25" diameter package and heights between 0.5" and 1" depending on the configuration. The separation of the load cell from the signal conditioning interface board gives greater flexibility to designers and inventors who want to fit the sensor into small spaces.
International Rectifier introduced the iP2005A. The device is optimized for very low EMI, eliminating the need for external snubber circuits in EMI-sensitive designs such as consumer game consoles. By eliminating external snubbers, it reduces per phase power loss by up to 2.3W compared to the previous generation device that required an external resistor and capacitor snubber with values of
Jim MacDonald, Zilker Labs, Inc. comments "The need for higher energy efficiency in embedded systems continues to rise on the priority list of systems developers and end users alike"
The concept of sustainable design started, not as a way of conserving the environment, but to prolong battery life in portable consumer goods such as cell phones, laptops and PDAs.
Acopian's narrow profile WN8 series of power supplies, with outputs from 3.3V DC to 48V DC and from 120W to 288W, have been recognized for compliance with the requirements of UL508. They can be used on an input of 90V AC to 265V AC or 110V DC to 350V DC. All models have power factor correction and output inhibit capability - applying between +3V DC and +25 VDC to the Inhibit terminal will disable the output.
Copley Controls has developed a hardened version of the versatile panel-mounting Accelnet servo drive to meet both military and extreme industrial environments. The drive’s extended temperature, humidity, vibration and shock ranges provide added security in non-extreme applications. Designated Series R20, the hardened drives provide networking and stand-alone motion control for brush and brushless motors
In the world of portable consumer-electronic devices, manufacturers are faced with a challenging prospect — creating physically smaller devices that have enhanced performance while maintaining or extending operating battery life. These requirements have rippled throughout the entire electronics industry, forcing battery and Integrated Circuit (IC) manufacturers to constantly push the boundaries of technology.
The Connor-Winfield XO125 is a 5V Voltage Controlled Oven Compensated Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. It is designed for Stratum 3E applications requiring a low aging rate and tight frequency stability. The device is housed in the standard CO8 EURO package with standard frequencies of 10 MHz and 12.8 MHz available.
BlockMaster Electronics announced the expansion of their high power line of thru-panel terminal blocks with the addition of the Series OTB-388 with a terminal pitch of 21 mm and Series OTB-488 at a 27 mm terminal pitch. Both of these carry a current capacity rating of 100A at 600V. The two series are designed for motor control, gen set, electric heating
Managing power is a critical requirement for all electronic equipment from notebooks to PDAs to storage peripherals. Power management ICs can optimize power usage to match the constantly changing demands of whatever task the device is carrying out. There are several important criteria to consider when selecting the best IC for an application.
CIT Relay & Switch JH Series is a momentary input switch offered with no LED, one LED or two LEDs. Cap color options include white, black, red, yellow, green, orange, blue, light gray and transparent. Tested electrical life of the series is 500,000 cycles with electrical rating of 50 mA at 25V DC. Contact resistance is <10 milliohm initial. The dielectric strength is 1000 Vrms minimum with insulation resistance of >100 milliohm minimum.
Tecate Industries announced the CAP-XX’s ultra-thin G Series of general-purpose supercapacitors. Comprised of the GS and GW Series of single-cell and dual-cell supercapacitors, the RoHS-compliant parts boast low impedance and a very low profile. The devices offer long-life performance at up to 2.3V in the single-cell versions and 4.5V in dual-cell configurations, with two cells connected in series.
Small logic analyzers put many digital channels, trigger options and I/O capabilities in an instrument that engineers can consider as their own. These small analyzers connect through a USB port to a host PC that controls functions and displays, and saves information.