Targeting battery-powered applications such as remote sensors, the LTC2451 and LTC2452 from Linear Technology are a pair of 16-bit delta sigma ADCs have a 0.5µA (max) shutdown current to extend system operating life. For example, the devices dissipate just 40 µW from a 3-V supply when sampling once per second. With a dynamic input current of less than 50 nA, the 3 x 2-mm 8-pin DFN-packaged devices
Sullins Connector Solutions expanded its 1.00 mm edgecard connector offering to include a full series of PCI Express (PCIe) parts. Designed to conform to PCI-SIG specifications, the devices enable user upgrades and bandwidth support to implement PCIe technology for desktop PCs and server systems. Featuring
ITT Interconnect Solutions has developed a corrosion resistant variation of its D-subminiature connectors. The stainless steel D-sub shells meet stringent requirements for corrosion resistance under MIL-Spec "P" grade stainless steel, while also meeting JEDEC standards for RoHS compliance. The shells are
Future Technology Devices International Limited (FTDI) announced availability of its USB NMC-2.5m USB to USB Null modem cable. Using an approach that was established using legacy RS-232 serial COM ports when the PC industry was in its infancy, the USB NMC-2.5m offers a
Presented as the first devices of their type, the FCAS20DN60BB and FCAS30DN60BB SRM-SPM power modules from Fairchild can drive two-phase switched-reluctance motors (SRM) in small motor applications such as vacuum cleaners.
Handheld, 1g Shaker Performs On-site Troubleshooting, Sensor Calibration and Performance VerificationMay 7, 2008 9:02 am | Product Releases | Comments
The IMI Sensors division of PCB Piezotronics (PCB) has released the Model 699A02 portable, lightweight, battery powered industrial handheld shaker. It is designed to verify accelerometer and vibration system performance, as well as confirm the operation of interconnecting cables, switching devices and monitoring systems. The unit operates at 159.2 Hz and delivers a controlled, 1g rms or 1g peak acceleration to
Mercury Computer Systems unveiled its PowerBlock 50 embedded computer for small platforms in the 6 lb. to 10 lb. range. Suited for real-time image, sensor, and signal processing and ruggedized for harsh environments, it is fully integrated and programmable, with liquid cooling. The system’s modular architecture allows for flexible configurations of multiple processors, providing
Littelfuse introduced the EV Series Enhanced Version Teccor brand Thyristors. They feature a minimum rated blocking voltage (Vdrm/Vrrm) of up to 800V, a maximum turn-on time (tq) as low as 25 µs, and a minimum rated static dv/dt of up to 75 V/µs. The high blocking voltage and dv/dt immunity are suited to designers creating circuits for
HVVi Semiconductors introduced its High Frequency, High Voltage Vertical Field Effect Transistor (HVVFET) architecture with products designed to operate from 24V to 48V and which feature low thermal resistance and high ruggedness. According to the company, the gain, efficiency and power density characteristics offer an opportunity to
Provided in a 4x4-mm MLPQ 12-pin package, the AS7620 from austriamicrosystems is a hysteretic, high efficiency 32-V step-down regulator deliver both “early-power-fail” warning and “power-good“ signals for increased system reliability. Operating with an efficiency as high as 93%, the 500-mA device accepts from 3.6 V to 32 V and is available with a fixed 3.3-V output or
Based upon the patent-pending UNI/O memory-device protocol, a 10-member family of serial EEPROM devices from Microchip have a single I/O bus interface and are presented as the first devices that can support any data rate from 10 to 100 kHz and the only 1-, 2-, 4-, 8-, and 16-kbit EEPROMs available in a 3-pin SOT-23 package.
Provided in a 10U configuration, Eaton's MGE Office Protection Systems10 kVA Pulsar MX Frame UPS enables users of the 5-kVA Pulsar MX 5000 RT to migrate upward while still using the original power and battery sub-modules of the original. When the Pulsar MX on-line double-conversion power modules are connected in parallel within the Pulsar MX Frame, the power can be scaled from 5 kVA to 10 kVA with from 9 kW or 4.5 kW with N+1 redundancy.
Ensuring compliance with USB-IF host certification standards, the USBHost Tester from Jungo tests embedded USB host stacks against the profiles of the thousands of commonly used USB devices in its database. Able to simulate entire class descriptors, the device also has a reporting facility. The tester can be used in a project along with the company's WinDriver development toolkit for custom device drivers to run on a variety of operating systems and
Providing wireless designers with an option for easy sub-GHz RF modem development, the EZLink Development Kit includes two EZLink radio modules with the Integration Associates’ IA4421 EZRadio transceiver and the PIC18F2520 8-bit Flash microcontroller from Microchip Technology. Users can create proprietary and standard-based short-range wireless networks
Providing insulation in high-power RF and microwave power transistor packages as well as electron devices such as inductive output tubes, the BW3250 beryllium oxide (BeO)material from Brush Ceramic Products delivers a thermal conductivity of greater than 325 W/mK at room temperature, an increase of over 15 percent from the 285 W/mK that was previously achievable.