Serving the Electronic Design Community Since 1956
ATCA Blade Employs Dual Processors
October 7, 2008 10:17 am | Product Releases | CommentsCoupling with the Intel 5100 memory controller hub (MCH) chipset operating with up to 1,333 MHz front side bus, JumpGen Systems’ PRA-200 AdvancedTCA (ATCA) node blade supports dual quad-core processors. The board can be deployed with 1 or 2 Intel Xeon L5408 processors running at up to 2.13 GHz, Intel Xeon L5238 processors running at up to 2.66 GHz, or other Intel processors in the 5400, 5300, 5200, and 5100 Series. The blade exhibits up to 32 GB of ECC DDR2 memory running at
Avionics Test System Targets MRO Apps
October 7, 2008 9:30 am | Product Releases | CommentsSupporting analog, digital, and mixed-signal testing applications, Geotest’s TS-375 6U avionics test system addresses test applications for depot and MRO (maintenance repair overhaul) facilities. The GX7102A PXI-based instrument offers a 960-pin, zero insertion force
Sensor Architecture Delivers ISR Capabilities
October 7, 2008 8:51 am | Product Releases | CommentsCombining information management, such as data fusion, exploitation, and dissemination, with signal and image processing, Mercury Computer Systems’ Converged Sensor Network (CSN) Architecture offers transformational ISR (intelligence, surveillance, and reconnaissance) capabilities. The sensor network solution uses
Host Adapter Presents 6,400 MB/s Throughput
October 7, 2008 8:19 am | Product Releases | CommentsIncluding an x8 PCI Express 2.0 bus interconnect, ATTO Technology’s Celerity FC-84EN 8 Gb quad-Fibre Channel host adapter exhibits full-duplex throughput of 1,600 MB/s per channel (6,400 MB/s on 4 channels). The board demonstrates aggregate speeds of up to 3,200 MB/s for reads or writes, and support for data applications including 2K and 4K film
Battery Chargers Utilize MOSFET Circuitry
October 7, 2008 5:32 am | Product Releases | CommentsConverting AC power to usable DC power, AMETEK Prestolite Power’s Prestolite Advanced Charger (PAC) Eclipse Series high-frequency battery chargers use MOSFET power conversion circuitry. The devices recharge any 100% discharged flooded or sealed lead-acid batteries and NiCad batteries within 8 hours. The chargers adapt to charging environments including opportunity charging and multiple battery types with 3 different equalize options, delayed start, and time of day block-out periods. The instruments allow the battery to determine its own
WiMAX SoC Supports Base Stations
October 6, 2008 12:31 pm | Product Releases | CommentsUsing Fujitsu 65 nm process technology, Fujitsu’s MB86K81 802.16e WiMAX base station SoC offers support for femto, pico, and micro base station architectures. The scalable component incorporates PHY and MAC features along with the analog and digital radio control, and analog circuits required for base station products to pass Mobile WiMAX Wave 2 certiciation requirements. An on-chip
Peak Power Meters Deliver High Sampling Rate
October 6, 2008 11:12 am | Product Releases | CommentsOperating at 20 MHz video bandwidth, Anritsu’s ML2480B Series wideband peak power meters demonstrate a sampling rate of 64 MS/s in next-generation wireless and military communications signals. The tools measure average power, peak power, and crest factor, as well as statistical analysis of complex modulated signals. The ML2487B supports single sensor
Connectors Target MicroTCA Applications
October 6, 2008 10:23 am | Product Releases | CommentsMeeting PICMIG specifications, Conec’s MicroTCA connector program suits MicroTCA applications. The MTCA.0-specified series consists of AMC backplane connectors in press-fit technology (Part # 47-000001), and power output connectors in press-fit technology for backplane (Part # 47-100001) and power modules (Part # 47-100011). The program includes
Power Sensors Cover 20 dBm
October 6, 2008 9:34 am | Agilent Technologies | Product Releases | CommentsReplacing the 8480 Series, Agilent Technologies’ N8480 Series thermocouple power sensors perform in a power range from -35 dBm to 20 dBm for a 55 dB dynamic range. The devices operate in a frequency range from 100 kHz to 33 GHz. The sensors incorporate a built-in EEPROM for storing calibration factors, enabling automatic loading of cal factors, and
Capacitors Function in High Voltage Bus Apps
October 6, 2008 8:42 am | Product Releases | CommentsPresenting voltage ratings from 100 VDC to 500 VDC, ITW Paktron’s RA Series multi-layer polymer (MLP) film capacitors are designed for high voltage bus applications. The devices exhibit capacitance values from 0.1 µF to 10 µF in commercial and military infrastructure products. The capacitors do not crack when exposed to temperature extremes or
Bluetooth Development Kit Includes Stereo DSP
October 6, 2008 7:45 am | Product Releases | CommentsSwitching between wireless music playback and voice calls, CSR’s BlueTunes ROM ROM-based Bluetooth development kit integrates a DSP for stereo headsets. The Bluetooth v2.1+EDR-compliant component offers an integrated stereo codec providing 95 dB SNR, support for sub band codec and mp3 decoding, a configurable 5-band equalizer, and a 180 mAh
Brushless Motors Exhibit High Efficiency
October 6, 2008 7:01 am | Product Releases | CommentsComing in 2- and 4-pole designs with or without hall sensors, Koford Engineering’s new line of 36 mm slotless brushless motors achieve efficiencies of up to 89%. The instruments present power outputs from 10 W to 620 W, speeds from 3,600 rpm to 30,000 rpm, and mechanical time constants as low as 4 ms. The 4-pole configuration doubles the resolution for hall feedback speed control. The cog-less motors are engineered to provide a straight line speed
DC/DC Converters Target Board-Level Applications
October 6, 2008 6:04 am | Product Releases | CommentsThe FED20W series of modular packaged dc/dc converters from Astrodyne are designed to meet power conversion requirements in board-level product applications such as data acquisition, communications, and industrial I/O. The FED20W series provides output power of 20 W and accepts 4:1 wide range inputs from 9 VDC to 75 VDC
DataCELL Cable Certified by the Fieldbus Foundation
October 6, 2008 5:51 am | Product Releases | CommentsNorthwire's DataCELL FOUNDATION fieldbus cable is the first to be FF-844 certified by the Fieldbus Foundation. All versions are ITC (instrument tray cable)/PLTC (power-limited tray cable) rated for exposed-run (ER) applications and pass the same crush and impact tests for metal-clad cable (under UL 1569). ITC-ER/PLTC-ER cable allows users to eliminate the conduit when the cable
DAC Uses 2.1 Vrms Line Driver
October 6, 2008 4:58 am | Product Releases | CommentsAllowing a 2 Vrms voltage after the RC filter, Cirrus Logic’s CS4252 24-bit DAC utilizes an on-chip 2.1 Vrms line driver from a single 3.3 V power supply. The 24-pin QFN-packaged unit exhibits 24-bit conversion, audio sampling rates up to 192 kHz, 106 dB dynamic range, and -93 dB THD+N. The converter performs in consumer electronics, such as set-top
