Serving the Electronic Design Community Since 1956
Pulse Shaping/Measurement Systems Switch Between Measurements
January 5, 2009 6:33 am | Product Releases | CommentsImplementing autocorrelation, FROG, XFROG, and single-shot SPIDER measurements, Fastlite’s Phazzler pulse shaping and measurement systems can switch between a FROG and a SPIDER measurement by clicking a button without switching the optical alignment. The devices integrate an AOPDF or turn key Dazzler pulse shaping system with its associated RF arbitrary waveform generator and its acousto-optic crystal. The instruments
Filter Media Meets UL 94
January 5, 2009 6:06 am | Product Releases | CommentsOperating in medical, power-gen, military electronics, telecom and filter applications requiring flame safety and dust arrestance, Universal Air Filter’s 0.12” Quadrafoam filter media complies with the UL 94 HF-1 rating. The compressible product is available in 45 ppi, 60 ppi, and 80 ppi (pores per inch). The media can be bonded to interior chassis walls for insulation or circuit card stabilization purposes. The RoHS-compliant product also meets
ESD Protection Arrays Offer Low Capacitance and Leakage Current
January 5, 2009 5:48 am | Product Releases | CommentsProtecting high-speed data lines against transient voltage signals, Vishay Intertechnology’s 2-line VBUS052CD-FAH and 4-line VIS054CD-FHI ESD protection arrays exhibit a load capacitance of 0.8 pF and max. leakage current of <1 µA at a working voltage of 5 V. The 0.6-mm high components present a typ. breakthrough voltage of
AC/DC Rocker Switches Resist Water
January 5, 2009 5:23 am | Product Releases | CommentsHaving IP56 certification, Cherry Electrical Products’ KS, KG, KT, and KM Series AC/DC rocker switches suit panel-mount applications in which the switches will be exposed to dust and water. The KS devices exhibits a current rating of 16 A at 125 VAC, while the KG, KT, and KM units are rated at 20 A at 125 VAC. The products offer a current rating of 21 A at 14 VDC, UL approval on AC loads, and 0.25” (6.35-mm) quick-connect tab
Temperature Sensors Measure Substrate Diodes
January 5, 2009 5:07 am | Product Releases | CommentsTargeting notebook PCs, servers, and industrial and embedded systems, SMSC’s EMC141x and EMC107x families of temperature sensors measure the temperature of a substrate diode found on GPUs, CPUs, FPGAs, or ASICs. The devices incorporate automatic beta compensation that detects the requirements of a thermal diode and self-configures the measurement attributes. The components have resistance error correction that adjusts
Power Supplies Target Medical Engineering Apps
January 5, 2009 4:39 am | Product Releases | CommentsReceiving CB-Scheme and VDE approval acc. to EN 60 950-1 and EN 60 601-1, MTM Power’s PMmed and PCMDmed48 Series primary-switched power supplies serve Class 1 and Class 2 medical engineering applications. The CE-compliant modules exhibit an output power of 48 W, single output voltages 5 VDC, 12 VDC, 24 VDC, and
Industrial-Grade Supply Delivers 175 W
December 31, 2008 10:36 am | Product Releases | CommentsUsing a resonant topology, the CLC175 single-output open-frame AC/DC power supply from XP Power can deliver up to 175 W. The 3” × 5” × 1.25” device has a power density as high as 9.3 W/in.³ and an efficiency as high as 87 percent. Only 10 cfm of forced airflow is required for full power, and a 12-VDC 0.5-A fan output
Mini-E is Highway Legal Pure Electric Vehicle
December 31, 2008 9:23 am | by by Jason Lomberg, Technical Editor | Blogs | CommentsHipsters of the world rejoice! Mini has announced the greatest thing since arthouse theater—an electric version of the Mini Cooper. Unveiled at the 2008 Los Angeles Auto Show, the Mini-E is the first highway legal all-electric vehicle. Amazingly, the Mini-E is heavier than its internal combustion engine (ICE) counterpart (curb weight of 3,230 vs. 2,546 for the ICE). This will satisfy those who feel greater mass equals greater safety. Despite its added bulk, the Mini-E has even greater front/rear weight balance than the ICE.
Integrated Switch and Schottky Diode Boost Regulators Offer Wide Input Range
December 31, 2008 8:42 am | Product Releases | CommentsMicrel introduced the MIC2605/6, two wide-input range integrated switch and Schottky diode boost regulators operating at 1.2 MHz (MIC2605) and 2 MHz (MIC2606). Both devices supply up to 0.5 A switch current. The devices, which complement the company's MIC2601/2 family, are
Circular Connectors Withstand up to 5 PSI
December 31, 2008 8:04 am | Product Releases | CommentsMaintaining 0.050 contact spacing, miniature circular connectors from ITT Interconnect Solutions withstand up to 5 PSI. The connectors meet IP68 standards and all insulator and contact areas within the connectors are sealed against environmental elements. The 37-pin connectors feature a twist pin contact system
VCO Operates From 2,770 to 2,920 MHz
December 31, 2008 7:58 am | Product Releases | CommentsWith a typical phase noise of -106 dBc/Hz @ 10KHz offset, the Crystek CVCO55CC-2770-2920 VCO (Voltage Controlled Oscillator) operates from 2,770 MHz to 2,920 MHz with a control voltage range of 0.5 V to 4.5 V. Output power is typically +4 dBm.
Line Driver Cables Serve Modular Encoders
December 31, 2008 7:51 am | Product Releases | CommentsDesigned to be used with the AMT series of modular encoders, a family of line driver cables from CUI measure approximately 1 m and have an operating temperature of -40°C to 85°C. Available with an on-board line driver chip (model ST26C31BDR) to convert the TTL signal to a line driver output
Low Profile, SMT, Dip Coded Rotary Switches Meet RoHS Directive
December 31, 2008 6:44 am | Product Releases | CommentsAPEM Components introduced its P36 Series, RoHS compliant, DIP Coded Rotary switches. The series comes in a compact, 7.4 mm square package, designed to save PCB space. Typical applications include security systems, laboratory instrumentation, telecommunications equipment and computer peripherals. These DIP coded rotaries are available in
Proximity Sensors Rated to 50 G
December 30, 2008 9:03 am | Product Releases | CommentsShock test rated to 50 G, Mobile Equipment Sensors from Pepperl+Fuchs are IP69K rated. Temperature range is -40°F to 185°F. Sensors are available in 12-mm, 18-mm, and 30-mm diameters to deliver 4-mm, 8-mm and 15-mm sensing ranges, respectively. The sensors are fully compatible with Deutsch, Weatherpack (Packard)
Fiber Lasers Integrate Aluminum Block
December 30, 2008 8:48 am | Product Releases | CommentsFeaturing a single-piece aluminum block, the Boreas family of high power fiber lasers from Eolite Systems is available in HE and HF. The HE comes in two different models: HE40 (1030 nm, 40W, 7 ns pulse duration, 2 mJ pulse energy) and HE80 (1030 nm, 80W, 7 ns, 2-mJ pulse energy). The HF is available in five different models depending on wavelength
