Targeting automated guided vehicles, Danaher Motion’s LS5 Navigator laser navigation sensors are designed for use in outdoor and indoor environments. The devices withstands variations in temperature from -30°C to 50°C, <95% relative humidity, and mechanical stress, such as vibrations and shock. The product comes with a direct drive motor and an optics system, and works with the AutoSurveyor software tool for automatic
Targeting a variety of applications, the PMAS/PCMAS Series of 60-W power modules from MTM Power accept an input of 90 to 264 VAC or 100 to 353 VDC and deliver single output voltages of 3,3 VDC 5 VDC, 12 VDC,15 VDC 24 VDC 36 VDC, and 48 VDC. The constant-current devices include features such as short-circuit protection, no-ground load operation, and a standby power mode.
Presented as the latest upgrade of the open source, object-oriented, embedded database for Java and .NET, Perst 4.0 from McObject expands Perst’s usefulness in a broad range of applications by enabling it to add persistence to any object—including objects created by other programs, those for which source code is unavailable, and even objects created in different programming languages.
Combining a NEMA size 14 brushless 1.8° stepping motor with electronics, Intelligent Motion Systems’ MDrive14Plus motor drives present a NEMA size 14 triple stack motor option. The instruments exhibit height of 2”, width of
Performing in storage compartments or access doors for vehicles and medical, electronics, self-service, and industrial equipment, Southco’s R4-EM rotary latch allows for electronic access. The 2.56" × 2.72" × 0.75" interconnect installs with two bolts and has all-metal construction. The unit operates from 12 VDC to 24 VDC with a current draw during actuation of <500 mA at 12 VDC. The product’s microprocessor control accepts
Utilizing an onboard transducer, PCB Automotive Sensors Division’s Series 5300D TORKDISC in-line rotary torque sensor systems designed serve automotive engine, powertrain, and chassis dynamometer testing, torque studies, and gearbox efficiency testing. The devices incorporate dual analog outputs, AC and DC coupled, providing static and dynamic torque measurement capabilities that can be recorded separately and
Said to replace multiple mechanical switches, soldered wires, and cable assemblies, NKK Switches’ FM Series membrane switch keypads perform in human-machine interface designs. The dot-illuminated configurations offer 12 or 16 keys, pre-configured legends on embossed keypads; and stroke from 0.5 mm to 1.2 mm. The
Suitable as input and output devices for solar, wind, and fuel-cell inverter applications, Premo’s POT CORE Series chokes operate in the renewable energy sector and railway sector applications. The shielded components offer heights of 100 mm, 120 mm, and 180 mm, diameters of 100 mm and 120 mm, and availability to assembly in 1 or 2 cells. The inductive units exhibit current up to 44 Arms, operating frequencies up to 25 KHz, and
Serving Bluetooth 2.4-GHz systems, CSR’s BlueCore7830 single-chip radio and baseband IC includes GPS and an integrated FM transmitter and receiver with stereo audio input and output stages, Bluetooth low energy, and RDS modulator/demodulator. With the on-chip CSR Bluetooth software stack, it provides a fully compliant Bluetooth system to v2.1 +EDR of the specification for data and voice communications. The component exhibits
Coming in an optimized TO38 package, OSRAM Opto Semiconductors’ new blue laser diode serves micro-projectors integrated in mobile devices, such as cell phones and digital cameras. The 3.2-mm high component demonstrates a wavelength of 450 nm, output of 50 mW, voltage of 5.5 V, and efficiency of 0.9 W/A. The ridge laser will serve as
Operating in the EB Propsim radio channel emulators, EB’s new spatial channel modeling (SCM) and SCM extended (SCME) emulation method and tool target mobile devices and base stations using Mobile WiMAX and 3GPP LTE. The product is based on a geometry-based stochastic modeling method for system-level emulations and performance metrics, such as throughput and delay, are measured over a number of
President Obama has ordered the EPA to “review” its denial of California’s request for exemption to federal emissions standards. On Monday, January 26th, Obama gave a press conference relating to, “Jobs, Energy Independence, and Climate Change.” Among other things, he spoke about America’s dependence on foreign oil, the proposed American Recovery and Reinvestment Plan, and the aforementioned EPA denial.
Using seventeen SERializer/DESerializer (SERDES) channels in the Lattice SC and Lattice SCM (Lattice SC/M) devices, the SERDES Framer Interface, Level 5 (SFI5) Intellectual Property (IP) Core from Lattice Semiconductor enables the creation of next-generation 40-Gbps systems. LatticeSC/M FPGA devices include 4- to 32-channels of high-speed SERDES capable of supporting data rates from 600 Mbps to 3.8 Gbps
Offering 3, 4, 8, or 10 positions, Mill-Max’s Series 917 TO-5 and TO-100 transistor sockets have precision-machined, brass alloy receptacles assembled with a Mill-Max, 4-finger #30 contact inside each socket. The #30 contact exhibits a pin diameter acceptance range from 0.015” to 0.025” and a current rating of 3 A per position. The through-hole and SMT devices utilize high-temperature thermoplastic suitable for wave soldering and
Including a temperature probe, test leads, alligator clips, and a soft case, Fluke’s latest version of the FlukeView Forms analysis and reporting software comes in a combo kit with Fluke 289 or Fluke 287 digital multimeters. The product offers TrendCapture for recording events and display results on the built-in display screen; and data logging for recording up to 15,000 events over time before downloading the results to a PC. The software presents